D-Link DGS-1210-52/ME rev.B [466/519] Show authen server_host

DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide

448

Example usage:

To delete a user-defined RADIUS authentication server host:

DGS-1210-28MP/ME:5# delete authen server_host 10.1.1.121 protocol radius

Command: delete authen server_host 10.1.1.121 protocol radius

Success.

DGS-1210-28MP/ME:5#

show authen server_host

Purpose To view a user-defined authentication server host.

Syntax

show authen server_host

Description

The show authen server_host command displays user-defined

authentication server hosts previously created on the Switch.

The following parameters are displayed:

IP Address – The IP address of the authentication server host.

Protocol – The protocol used by the server host. Possible results

include TACACS+ or RADIUS.

Port – The virtual port number on the server host. The default value

is 49.

Timeout - The time in seconds the Switch waits for the server host to

reply to an authentication request.

Retransmit - The value in the retransmit field denotes how many

times the device resends an authentication request when the

TACACS server does not respond. This field is inoperable for the

tacacs+ protocol.

Key - Authentication key to be shared with a configured TACACS+

server only.

Parameters None.

Restrictions Only Administrator-level users can issue this command.

Example usage:

To view authenticaion server hosts currently set on the Switch: