D-Link DGS-1210-52/ME rev.B [39/519] Config autoconfig

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

Success.

DGS-1210-28MP/ME:5#

config autoconfig

Purpose Use to configure the auto configuration timeout time from DHCP.

Syntax

config autoconfig timeout <value 1-65535>

Description

The config autoconfig command is used to the auto configuration

timeout time from DHCP.

Parameters

timeout <value 1-65535> - Specifies the timeout time. And the value

is from 1 to 65535 seconds.

Restrictions Only Administrator or operator-level users can issue this command.

Example usage:

To configure the auto configuration timeout time to 100 seconds:

DGS-1210-28MP/ME:5# config autoconfig timeout 100

Command: config autoconfig timeout 100

Success.

DGS-1210-28MP/ME:5#

show autoconfig

Purpose Used to display the current autoconfig status of the Switch.

Syntax

show autoconfig

Description

The show autoconfig command is used to list the current status of

the auto configuration function.

Parameters None.

Restrictions None.

Example usage:

To display the autoconfig status:

DGS-1210-28MP/ME:5# show autoconfig

Command: show autoconfig

Autoconfig State : Enabled

Timeout : 50 sec

DGS-1210-28MP/ME:5#

save

Purpose To save changes in the Switch’s configuration to non-volatile RAM.

Syntax

save {[config config_id <value 1-2> | log]}

Description

The save command

used to enter the current switch configuration

into non-volatile RAM. The saved switch configuration will be loaded