D-Link DGS-1210-52/ME rev.B [385/519] Command parameter

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide

367

Command Parameter

guest_vlan

create 802.1x user <username 15>

show 802.1x user

delete 802.1x user <username 15>

config 802.1x capability

ports

[<portlist> | all] [authenticator | none]

Each command is listed in detail, as follows:

enable 802.1x

Purpose To enable the 802.1x server on the Switch.

Syntax

enable 802.1x

Description

The enable 802.1x command enables the 802.1x Port-based

Network Access control server application on the Switch.

Parameters None.

Restrictions Only Administrator, operator or power user-level users can issue this

command.

Example usage:

To enable 802.1x switch wide:

DGS-1210-28MP/ME:5# enable 802.1x

Command: enable 802.1x

Success.

DGS-1210-28MP/ME:5#

disable 802.1x

Purpose To disable the 802.1x server on the Switch.

Syntax

disable 802.1x

Description

The disable 802.1x command disables the 802.1x Port-based

Network Access control server application on the Switch.

Parameters None.

Restrictions Only Administrator, operator or power user-level users can issue this

command.

Example usage:

To disable 802.1x on the Switch:

DGS-1210-28MP/ME:5# disable 802.1x

Command: disable 802.1x