CMI C-TP 250 — безопасное использование и установка погружного насоса [20/68]
Макгруп McGrp.ru

CMI C-TP 250 — безопасное использование и установка погружного насоса [20/68]

Превью страниц Страница 20 / 68
CMI C-TP 250 [20/68] Your appliance at a glance
20
• Check the plug and cable before each use.
• If the power cable is damaged immediately dis-
connect the plug. Never use the device if the
power cable is damaged.
• If the device is not in use make sure the plug is
pulled out.
• Make sure that the device is switched off before
plugging in the mains cable.
• Make sure that the device is switched off before
unplugging it.
• Disconnect the power supply before transport-
ing the device.
Device-specific safety instructions
• Extension cables must not be used.
• Disconnect the mains plug before all work on the
appliance.
• Do not install and switch on the appliance if there
are people or animals in the medium being
pumped (e.G. a swimming pool), or they are in
contact with it.
• Children and young people under the age of 16
years must not use this appliance, and must be
kept away from it when it is in operation.
• Do not leave the unit unattended. If leaving it for
any period of time, unplug.
• Repairs must be carried out only by a qualified
electrician. If repairs are carried out incorrectly,
there is a danger of liquid penetrating into the
electrical components of the appliance.
• Remember that moving parts may also be
located behind ventilation and venting slots.
• Symbols affixed to your tools may not be
removed or covered. Information on the device
that is no longer legible must be replaced imme-
diately.
Your appliance at a glance
►P.3, item1
1. Carrying handle
2. Hose adapter for pressure connection
3. Elbow
4. Suction openings
5. Float switch
6. Mains cable and plug
7. Float switch height adjustment
What is included
• Submersible pump
• Instructions for use
Operation
Installation and commissioning
Attach a sufficiently long and strong rope to the han-
dle before first use. The pump is submerged into the
liquid on this holding rope and can also be carried
with it as well as with the handle.
Connect pressure pipe
Use a suitable water hose with a diameter of 25mm
(1") to 38mm (1½") for only occasional use.
The use of rigid pipes with a non-return valve is rec-
ommended for use at a fixed location. This prevents
return flow of the liquid when switching off.
– Screw pressure line onto the pressure connec-
tion.
– When using a hose, screw the hose adapter onto
the pressure connection.
– Push the hose firmly onto the hose adapter and
secure with a hose clamp.
The hose adapter can also be shortened as shown.
In this case, connection of a hose with union nut
(32mm(1¼")) is possible.
Installation
The appliance needs an area of at least 50×50cm
(the float switch must be able to move freely so that
it functions properly).
The appliance can be submerged under water up to
the submerged operating depth mentioned in the
technical data.
Install the appliance so that the suction openings
cannot be blocked by foreign bodies (place the
appliance on a firm, even base if necessary).
Ensure that the appliance is stable.
– Submerge the pump at an angle into the liquid to
be delivered so that no air pocket forms on the
underside of the appliance. Suction would be
prevented by this. Once the pump is submerged,
it can be righted again.
– Leave the pump on the bottom of the liquid con-
tainer. Use a strong rope attached to the carry-
ing handle of the pump for lowering.
– Tighten the end of the rope firmly after lowering.
The pump can also be operated while suspended on
a rope.
Read and observe the operating instruc-
tions before commissioning.
Note: In the case of continuous use of the
pump with the rope, the condition of the
rope must be checked regularly as it can
decay and break over time.
NOTICE! Risk of damage to the appli-
ance! Only tighten the hose adapter by
hand during mounting! Overtightening the
adapter damages the thread.
NOTICE! Risk of damage to the appli-
ance! Do not lift the pump with the cable or
pressure hose as these are not designed for
the tensile stress from the weight of the
pump.
GB
Tauchpumpe_420602_420603.book Seite 20 Mittwoch, 4. November 2015 11:16 11

Содержание

296

Похожие устройства

Узнайте, как правильно использовать и устанавливать погружной насос. Следуйте инструкциям по безопасности и эксплуатации для надежной работы устройства.

Кешбек Менеджер