![Defort DPC-2018 [16/72] Cold engine](/img/pdf.png)
Defort DPC-2018 [16/72] Cold engine
![Defort DPC-2018 [16/72] Cold engine](/views2/1066739/page16/bg10.png)
16
LONG-TERM STORAGE
Empty the fuel/oil tanks in a well ventilated area. Store
the fuel in approved cans in a safe place. Fit the bar
guard. Clean the machine.
STARTING AND STOPPING
WARNING! Note the following before start-
ing: The chain brake must be engaged when
the chain saw is started to reduce the chance
of contact with the moving chain during starting.
Never start a chain saw unless the bar, chain and all
covers are fi tted correctly. Otherwise the clutch can
come loose and cause personal injuries. Place the ma-
chine on fi rm ground. Make sure you have a secure
footing and that the chain cannot touch anything.
Keep people and animals well away from the working
area.
COLD ENGINE
Starting: The chain brake must be engaged when the
chain saw is started. Activate the brake by moving the
front hand guard forwards.
1. Air purge: Press the air purge repeatedly until fuel
begins to fi ll the bulb. The bulb need not be com-
pletely fi lled.
2. Choke: Pull the blue choke/fast idle lever out to the
full extent (to the FULL CHOKE position). When the
choke/ fast idle lever is pulled out to the full extent,
the correct throttle setting is set automatically.
Start throttle: The correct choke/start throttle setting
is obtained by moving the control to the choke posi-
tion.
Starting
Grip the front handle with your left hand. Hold the chain
saw on the ground by placing your right foot through
the rear handle.
3. Pull the starter handle with your right hand and pull
out the starter cord slowly until you feel a resistance
(as the starter pawls engage) then pull fi rmly and
rapidly. Never twist the starter cord around your
hand.
CAUTION! Do not pull the starter cord all the
way out and do not let go of the starter handle
when the cord is fully extended. This can
damage the machine.
4. Push in the choke control to the ”1/2 choke” set-
ting as soon as the engine fi res which can be heard
through a "puff" sound.
5. Keep on pulling the cord powerfully until the engine
starts. Allow engine to warm for thirty seconds, then
squeeze throttle trigger to set normal idle.
As the chain brake is still engaged the speed of the
engine must be set to idling as soon as possible, this
is achieved by quickly pressing the throttle trigger
once. This prevents unnecessary wear to the clutch,
clutch drum and brake band.
Clean the area around the fuel cap. Clean the fuel
and chain oil tanks regularly. The fuel fi lter must be re-
placed at least once a year. Contamination in the tanks
causes malfunction.
Make sure the fuel is well mixed by shaking the con-
tainer before refuelling. The capacities of the chain oil
tank and fuel tank are carefully matched. You should
therefore always fi ll the chain oil tank and fuel tank at
the same time.
WARNING! Fuel and fuel vapour are highly
fl ammable. Take care when handling fuel and
chain oil. Be aware of the risks of fi re, explo-
sion and those associated with inhalation.
FUEL SAFETY
● Never refuel the machine while the engine is run-
ning.
● Make sure there is plenty of ventilation when refuel-
ling or mixing fuel (petrol and 2-stroke oil).
● Move the machine at least 3 m from the refuelling
point before starting it.
● Never start the machine:
1 If you have spilt fuel or chain oil on the machine.
Wipe off the spillage and allow remaining fuel to
evaporate.
2 If you have spilt fuel on yourself or your clothes,
change your clothes. Wash any part of your body that
has come in contact with fuel. Use soap and water.
3 If the machine is leaking fuel. Check regularly for
leaks from the fuel cap and fuel lines.
WARNING! Never use a machine with visible
damage to the spark plug guard and ignition
cable. A risk of sparking arises, which can
cause a fi re.
TRANSPORT AND STORAGE
● Always store the chain saw and fuel so that there
is no risk of leakages or fumes coming into contact
with sparks or naked fl ames from electrical equip-
ment, electric motors, relays/switches, boilers and
the like.
● Always store fuel in an approved container designed
for that purpose.
● For longer periods of storage or for transport of the
chain saw, the fuel and chain oil tanks should be
emptied. Ask where you can dispose of waste fuel
and chain oil at your local petrol station.
● Ensure the machine is cleaned and that a complete
service is carried out before long-term storage.
● The bar guard must always be fi tted to the cutting
attachment when the machine is being transported
or in storage, in order to prevent accident contact
with the sharp chain. Even a non-moving chain can
cause serious cuts to yourself or persons you bump
into with an exposed chain.
● Secure the machine during transport.
Содержание
- Dpc 2018 1
- Starting 3
- Stopping 3
- Antivibrationssystem 4
- Benzin kettensäge 4
- Die bedienungsanleitung aufmerksam durchlesen 4
- Kettenbremse mit handschutz 4
- Massnahmen vor der benutzung einer neuen motorsäge 4
- Persönliche schutzausrüstung 4
- Sicherheitsausrüstung des gerätes 4
- Wichtig 4
- Grundregeln 5
- Rückschlag reduzierende schneidausrüstung 5
- Stoppschalter 5
- Sägekette schärfen und tiefenbegrenzerabstand justieren 5
- Montage von schiene und kette 6
- Schmierung der schneidausrüstung 6
- Spannen der sägekette 6
- Benzin 7
- Kettenöl 7
- Kraftstoff 7
- Mischen 7
- Mischungsverhältnis 7
- Tanken 7
- Zweitaktöl 7
- Kalter motor 8
- Sicherer umgang mit kraftstoff 8
- Starten 8
- Starten und stoppen 8
- Grundlegende sicherheitsvor schriften 9
- Grundregeln 9
- Stoppen 9
- Vor jeder anwendung 9
- Warmer motor 9
- Allgemeines 10
- Feineinstellung des leerlaufs 10
- Funktion 10
- Grundeinstellung und einfahren 10
- Wartungsschema 10
- Chain brake and front hand guard 12
- General safety precautions 12
- Machine s safety equipment 12
- Personal protective equipment 12
- Petrol chainsaw 12
- Vibration damping system 12
- Cutting equipment designed to reduce kickback 13
- Cutting equipment general rules 13
- Sharpening your chain and adjust ing depth gauge setting 13
- Adjustment of depth gauge setting 14
- Lubricating cutting equipment 14
- Tensioning the chain 14
- Assembly 15
- Fitting the bar and chain 15
- Fuelling 15
- Mixing 15
- Mixing ratio 15
- Two stroke oil 15
- Cold engine 16
- Fuel safety 16
- Long term storage 16
- Starting and stopping 16
- Transport and storage 16
- Before use 17
- General rules 17
- Working techniques 17
- Carburettor adjustment 18
- Function 18
- General 18
- Maintenance schedule 18
- Frein de chaîne avec arceau protecteur 20
- Mesures à prendre avant de mettre en usage une tronçonneuse neuve 20
- Système anti vibrations 20
- Tronçonneuse d essence 20
- Équipement de protection personnelle 20
- Affûtage et réglage de l épaisseur du copeau de la chaîne 21
- Bouton d arrêt 21
- Règles élémentaires 21
- Silencieux 21
- Équipement de coupe anti rebond 21
- Lubrification de l équipement de coupe 22
- Tension de la chaîne 22
- Carburant 23
- Essence 23
- Huile deux temps 23
- Montage du guide chaîne et de la chaîne 23
- Mélange 23
- Rapport de mélange 23
- Démarrage et arrêt 24
- Huile pour chaîne 24
- Remplissage de carburant 24
- Sécurité carburant 24
- Transport et rangement 24
- Avant chaque utilisation 25
- Moteur chaud 25
- Règles élémentaires de sécurité 25
- Fonctionnement 26
- Généralités 26
- Règles élémentaires 26
- Réglage de base et rodage 26
- Réglage du carburateur 26
- Schéma d entretien 26
- Инструкция по технике безопасности 28
- Комплектация 28
- Пила бензиновая 28
- Технические характеристики 28
- Подготовка к работе 30
- Обслуживание 33
- Перечень работ по периодическому обслуживанию 35
- Циями гарантия на изделие утратит силу невыпол нение рекомендуемых правил обслуживания может привести к несчастным случаям пользователю цепной пилы не разрешается выполнять работы по обслуживанию которые не описаны в инструкции такая работа должна быть проведена в сервисном центре 35
- Чтобы обеспечить долговременное использование и предотвратить повреждения следует регулярно выполнять описанные ниже операции по обслу живанию изделия если периодический ремонт не будет выполняться регулярно и согласно с инструк 35
- Неисправности и их устранение 36
- Bencinska žaga 37
- Komplet 37
- Tehnične specifikacije 37
- Varnostna navodila 37
- Izklop zavore verige 39
- Namestitev tračnice in žagine verige 39
- Preverjanje napetosti verige 39
- Priprava na delo 39
- Vklop zavore verige 39
- Zategovanje žagine verige 39
- Zavora verige 39
- Hladen motor 40
- Mazanje verige 40
- Olje za verigo 40
- Polnjenje goriva 40
- Preverjanje mazanja žagine verige 40
- Preverjanje zavore verige 40
- Zagon motorja 40
- Zmes goriva 40
- Brušenje žagine verige 41
- Osnovne nastavitve 41
- Pila in kako z njo delati 41
- Pravilno brušenje 41
- Topel motor 41
- Ustavitev 41
- Vzdrževanje 41
- Menjava vžigalne svečke 42
- Menjava žagine verige 42
- Preverjanje vžigalne iskre 42
- Reža med elektrodami 42
- Seznam vzdrževalnih del 42
- Čiščenje traka zavore žage in notranjosti zavornega pokrova 42
- Čiščenje zračnega filtra 42
- A gép és tartozékai 44
- Benzinmotoros láncfűrész 44
- Biztonságtechnikai előírások 44
- Műszaki jellemzők 44
- A munka előkészületei 46
- Kerülje az olaj bőrrel és szemmel való érintkezését 47
- Soha ne használjon fáradtolajat 47
- Karbantartás 49
- Az időszakos karbantartási és ápolási munkák listája 50
- Testera benzinska 52
- Uputstvo za bezbedno rukovanje 52
- Комpletiranje 52
- Теhnički podaci 52
- Priprema za rad postavljanje vodilice i lanca 54
- Provera zategnutosti lanca 54
- Iskopčavanje kočnice lanca 55
- Kočnica lanca 55
- Podešavanje zategnutosti lanca 55
- Podmazivanje lanca 55
- Provera kočnice lanca 55
- Provera podmazivanja lanca 55
- Smeša goriva 55
- Uključivanje kočnice lanca 55
- Ulje za lanac 55
- Paljenje 56
- Paljenje hladnog motora 56
- Paljenje motora 56
- Paljenje toplog motora 56
- Podešavanje brzine praznog hoda 56
- Sipanje goriva 56
- Zaustavljanje 56
- Коntrola brzine praznog hoda 56
- Коntrola ubrzanja 56
- Оsnovno podešavanje 56
- Pažnja uverite se da u žljebu za ulje i u zatezaču lanca nema osta taka ulja ili prljavštine 57
- Pravilno oštrenje 57
- Turpije i kako ih koristiti 57
- Zamena lanca 57
- Čišćenje trake kočnice testere i unutrašnjosti poklopca kočnice 57
- Оdržavanje oštrenje lanca testere 57
- Popis radova na periodičnom održa vanju 58
- Provera varnice 58
- Zamena svećice 58
- Zazor između elektroda 58
- Čišćenje vazdušog filtera 58
- Pila benzinska 59
- Upute za sigurno rukovanje 59
- Комpletiranje 59
- Теhnički podaci 59
- Kočnica lanca 61
- Podešavanje zategnutosti lanca 61
- Postavljanje vodilice i lanca 61
- Priprema za rad 61
- Provjera zategnutosti lanca 61
- Uključivanje kočnice lanca 61
- Iskopčavanje kočnice lanca 62
- Paljenje 62
- Paljenje hladnog motora 62
- Paljenje motora 62
- Podmazivanje lanca 62
- Provjera kočnice lanca 62
- Provjera podmazivanja lanca 62
- Sipanje goriva 62
- Smješa goriva 62
- Ulje za lanac 62
- Oštrenje lanca pile 63
- Paljenje toplog motora 63
- Podešavanje brzine praznog hoda 63
- Pravino oštrenje 63
- Zaustavljanje 63
- Коntrola brzine praznog hoda 63
- Коntrola ubrzanja 63
- Оdržavanje 63
- Оsnovno podešavanje 63
- Popis radova na periodičnom održavanju 64
- Provjera iskre 64
- Turpije i kako ih koristiti 64
- Zamjena lanca 64
- Zamjena svjećica 64
- Zazor između elektroda 64
- Čišćenje trake kočnice pile i unutrašnjosti poklopca kočnice 64
- Čišćenje zračnog filtera 64
- Exploded view dpc 2018 68
- Spare parts list dpc 2018 69
- A környezetvédelemmel kapcsolatos tudnivalók 71
- Environmental protection en 71
- Fr informations sur la protection de l environnement 71
- Hinweise zum umweltschutz de 71
- Napotki za zaščito okolja sl 71
- Ru upute o zaštiti okolišai hr bos 71
- Uputstvo o zaštiti okoline sr 71
- Указания по защите окружающей среды 71
Похожие устройства
- Panasonic CQ-C5303W Инструкция по эксплуатации
- Defort DPC-2220 Инструкция по эксплуатации
- Hansa BOEI67480050 Инструкция по эксплуатации
- Hansa BOEI66230030 Инструкция по эксплуатации
- Defort DEC-1646N Инструкция по эксплуатации
- Hansa BOEI67130020 Инструкция по эксплуатации
- Panasonic CQ-C5300N Инструкция по эксплуатации
- Defort DEC-2046N Инструкция по эксплуатации
- Panasonic CQ-C5100N Инструкция по эксплуатации
- Hansa BOEI64030020 Инструкция по эксплуатации
- Defort DDT-1100A Инструкция по эксплуатации
- Panasonic CQ-C3503N Инструкция по эксплуатации
- Hansa BOEI64130050 Инструкция по эксплуатации
- Defort DDT-1400A Инструкция по эксплуатации
- Panasonic CQ-C3403W Инструкция по эксплуатации
- Hansa BOEI62000020 Инструкция по эксплуатации
- Defort DGT-1010N Инструкция по эксплуатации
- Hansa BOEI62030030 Инструкция по эксплуатации
- Defort DGT-500N Инструкция по эксплуатации
- Hansa BOEI64000020 Инструкция по эксплуатации
Скачать
Случайные обсуждения