Biostar M7VIT 800 [57/57] Bios setup

BIOS Setup

9 Frequency/ Voltage Control

 Fig ure 9. F requency/ Voltage Contro l

Auto Detect PCI/DIMM Clk

This item allows you to enable / disable auto Detect PCI Clock.

The Choices: Enabled (Default), Disabled.

CPU Clock

This item allows you to select CPU Clock, and CPU over clocking.

Min=100

Max=255

The Choices: 100MHz (Default)

If unfortunately, the system’s frequency that you are selected is

not functioning, there are two methods of booting-up the system.

Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))

as “ON” status. All the CMOS data will be loaded as

defaults settin g.

Method 2: Press the <Insert> key and Power button simultaneously,

after that keep-on pressing the <Insert> key until the

power-on screen showed. This action will boot-up the

system according to FSB of the processor.

※ It’s strongly recommended to set CPU Vcore and clock in

default setting. If the CPU Vcore and clock are not in default

setting, it may cause CPU or M/B damage.