Biostar NF61S Micro 754 Версия 6.x [22/33] Nf61s micro 754 bios setup

NF61S Micro 754 BIOS Setup

Parallel Port Mode

This item allows you to determine how the parallel port should function. The

default value is SPP.

The Choices:

SPP (default) Using P arallel port as Standard P rinter Port.

EPP Using Parallel Port as Enhanced Parallel Port.

ECP Using Parallel port as Extended Capabilities Port.

ECP+EPP Using Parallel port as ECP & EPP mode.

ECP Mode Use DMA

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

Onboard GPU

This item allows you to control the Onboard GPU.

The Ch oices: Auto (default), Always Enable.

Init Display First

With systems that have multiple video cards, this item determines whether the

primary display uses a PCI Slot or an AGP Slot.

The Ch oices: PCI-Express (default), PCI Slot, Onboard.

OnChip USB

This option should be enabled if your system has a USB installed on the system

board. You may need to disable this feature if you add a higher performance

controller.

The Ch oices: V1. 1+V2.0 (default), Disabled, V1.1

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple

sectors read / write. If your IDE hard drive supports block mode (most new

drives do), select Enabled for automatic detection of the optimal number of

block mode (most new drives do), select Enabled for automatic detection of the

optimal number of block read / write per sector where the drive can support.

The Ch oices: Enabled (default), Disabled.