Biostar NF61S Micro 754 Версия 6.x [28/33] Nf61s micro 754 bios setup

NF61S Micro 754 BIOS Setup

and provides non-PnP ISA add-on cards. PCI / ISA PnP signify that a resource

is assigned to the PCI Bus or provides for ISA PnP add-on cards and

peripherals.

The Choices: Disabled (default), Enabled.

Resources Controlled By

By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system

resources and automatically assign the relative IRQ and DMA channel fo r each

peripheral. By Choosing “Manual”, the user will need to assign IRQ & DMA for

add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.

The Choices: Auto (ESCD) (default), Manual.

IRQ Resources

T his submenu will allow you to assign each system interrupt a type, depending

on the type of device using the interrupt. When you press the “Press Enter” tag,

you will be directed to a submenu that will allow you to configure the system

interrupts. This is only configurable when “ Resources Controlled By” is set to

“Manual”.

IRQ-5 assigned to PCI Device

IRQ-7 assigned to PCI Device

IRQ-9 assigned to PCI Device

IRQ-10 assigned to PCI Device

IRQ-11 assigned to PCI Device

IRQ-14 assigned to PCI Device

IRQ-15 assigned to PCI Device

PCI / V GA Palette Snoop

Some old graphic controllers need to “snoop” on the VGA palette and then map

it to their display as a way to provide boot information and VGA compatibility.

This item allows such snooping to take place.

The Choices: Disabled (default), Enabled.

Maximum Payload Size

Set the maximum payload size for T ransaction packets (T LP).

The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.