Vitek VT-1557 [5/80] English

Vitek VT-1557 [5/80] English
Set the steam sprayer (7).
Set the mesh filter (11) in the special re-
cess in the water tank (10).
Fill the water tank (10) with cold water up
to the МАХ mark.
You can fill the water tank with water in two
ways: - through the fill port (9) (Pic. 1) or
directly in the water tank (Pic. 2).
If while cooking you will find that there
is not enough water you can add water
through the fill port, (9), without removing
the steam bowls (Pic. 1).
Use filtered water; it has lower hardness,
and it will allow reducing scaling on the heat-
ing element. Do not exceed the MAX mark
while filling the water tank with water.
Warning
- Do not add any salt, pepper, seasonings,
herbs, wine, sauces or other liquids to the
water tank. It may lead to damages of the
unit.
- Change water for every usage of the unit.
Place the tray for the condensate collec-
tion (6) on the water tank (10) and make
sure that it is set properly.
Set one or more steam bowls (1-2-3) on
the tray.
Close the steam bowl with the Lid (5).
Insert the plug into the socket, a sound
signal will be heard and the LCD-display
will light up; the Steam cooker is ready to
operate within 45 minutes.
Note:
if no actions are performed during 1
minute two sound signals will be heard
and the Steam cooker will switch off.
Switch on the Steam cooker by pressing
the (15) button, the LCD-display (14) will
light up and you will hear a sound signal.
Use the auto cooking mode selection
button (17) to select one of the operat-
ing modes: cooking eggs, fish, vegeta-
bles, meat, chicken, rice, heating mode,
and one of the two programmed cooking
modes “Р1” and “Р2”. The corresponding
indication of the product, cooking time
and heating time will light up on the LCD-
display (17).
After selecting one of the auto cooking
modes you can change the preset cook-
ing time, using the (18) buttons.
Press the (19) button to start cooking/
heating products, the (
) or (
) symbol will be flashing on the LCD-dis-
play.
After the cooking time is finished, two
sound signals will be heard and the Steam
cooker will switch to the heating mode,
heating time is 20 minutes (the (
) symbol will be flashing on the LCD-dis-
play.
After heating is finished you will hear 5
sound signals, and the Steam cooker will
switch to the heating mode, in a minute
two sound signals will be heard and the
Steam cooker will switch off.
Note:
in the heating mode you can change
heating time using the (18) buttons.
To stop cooking or heating, press the (19)
button, the (
) or ( ) symbols will
be on constantly.
Press the (15) button to switch off the unit,
or wait till it switches off automatically
WARMING-UP PRODUCTS
Use the (17) button to select the heating
mode, the (
) symbol, use the (18)
buttons to set the necessary heating time
from 1 to 99 minutes, press the (19) but-
ton to switch on the unit.
After heating is finished you will hear 5
sound signals, in a minute two sound sig-
nals will be heard and the Steam cooker
will switch off.
5
ENGLISH
1557.indd 51557.indd 5 14.02.2008 9:15:3414.02.2008 9:15:34

Содержание

Скачать