![Zotek ZT-219 Инструкция по эксплуатации онлайн [20/28] 675527](/img/pdf.png)
Zotek ZT-219 Инструкция по эксплуатации онлайн [20/28] 675527
![Zotek ZT-219 Инструкция по эксплуатации онлайн [20/28] 675527](/views2/1893224/page20/bg14.png)
16
2. Turn the rotary switch to , press SELECT
twice to toggle to the Temperature Mode and
the display will show the room temperature, to
toggle between ℃/℉, press SELECT button.
3. Touch the probes to the desired test points.
4. Read the measured temperature on the
display.
Test NCV
1. Turn the rotary switch to .
2. Hold the product and move it around, the built-
in beeper will beep when the inner sensor
detects AC voltage nearby. The stronger the
voltage is, the quicker the beeper beeps.
*Do not input voltage at this setting.
Содержание
- User manual 1
- And limitation of liability 2
- Customers enjoy one year warranty 2
- Failures caused by use outside of the 2
- Limited warranty 2
- Lcd display 3
- Table of contents page 3
- Test diodes 2 3
- Maintenance 7 4
- Introduction 5
- Look for cracks or missing plastic carefully look 5
- Personal injury please read all safety information 5
- Rms a lcd display and a backlight 5
- Safety information 5
- To the line being measured do not touch the 6
- When the input is out of range 6
- Instrument overview 7
- ③ relative mode 7
- Auto range the product selects 8
- Sinusoidal and nonsinusoidal ac 8
- ⑫ voltage test volt 8
- ⑲ alternating current 8
- Backlight automatically turns off after 2 9
- Frequency duty cycle 9
- As a reference for subsequent readings the 10
- Power off press the sel button or 11
- Turn off the product at this position 11
- Ac voltage 750v 12
- Celsius 20 1000 12
- Duty cycle from 1 99 12
- Measurements instruction 14
- Terminal and the red lead to the ma μ a 14
- Terminal and the red lead to the vωhz 14
- Connect the black test lead to the com 16
- Resistance is lower than 50ω which indicates a 16
- Turn the rotary switch to press select 16
- Read the forward bias voltage value on the 17
- Three times to toggle to the capacitance mode 17
- Connect the black thermocouple probe to the 19
- Read the measured duty cycle value on the 19
- Turn the rotary switch to press select 19
- Are qualified to do so and have the relevant 21
- Clean the product 21
- Maintenance 21
- Product 21
- Loosen the four screws on the back cover and 22
- Of the same type 22
- Place the back cover and the battery door 22
- General specifications 23
- Operating 23
- Specifications 23
- Electrical specifications 24
- Mv 0 01mv 24
- 9μa 0 1μa 25
- Μa 0 μa 25
- Capacitance 26
- Function range resolution accuracy 26
- Mhz 0 01mhz 26
- Μf 0 01μf 26
- Continuity 27
- Function range resolution accuracy 27
Похожие устройства
- Zotek ZT-111 Инструкция по эксплуатации
- Zotek ZT-102A Инструкция по эксплуатации
- Zotek ZT-S1 Инструкция по эксплуатации
- Zotek ZT-303 Инструкция по эксплуатации
- Zotek ZT-102 Инструкция по эксплуатации
- Zotek ZT-M1 Инструкция по эксплуатации
- Zotek ZT-109 Инструкция по эксплуатации
- Zotek ZT-A6 Инструкция по эксплуатации
- Zotek ZT-98 Инструкция по эксплуатации
- Zotek ZT-100 Инструкция по эксплуатации
- Zotek ZT-101 Инструкция по эксплуатации
- Zotek ZT-C1 Инструкция по эксплуатации
- Zotek ZT-C2 Инструкция по эксплуатации
- Zotek ZT-C3 Инструкция по эксплуатации
- Zotek ZT-C4 Инструкция по эксплуатации
- Zotek ZT-S2 Инструкция по эксплуатации
- Yli Electronic YK-1068B Спецификация
- Zotek ZT-S3 Инструкция по эксплуатации
- Zotek ZT-S4 Инструкция по эксплуатации
- Zotek ZT-301 Инструкция по эксплуатации