![Zotek ZT-219 [22/28] Loosen the four screws on the back cover and](/img/pdf.png)
Zotek ZT-219 [22/28] Loosen the four screws on the back cover and
![Zotek ZT-219 [22/28] Loosen the four screws on the back cover and](/views2/1893224/page22/bg16.png)
2. Loosen the screw on the battery door and
remove the battery door.
3. Replace the used batteries with new batteries
of the same type.
4. Place the battery door back and fasten the
screw.
Replace the Fuses
When a fuse is blown or do not work properly, it
shall be replaced as below:
1. Remove the test leads and turn off the product
before replacing the fuse.
2. Loosen the four screws on the back cover and
the screw on the battery door, then remove the
battery door and the back cover.
3. Replace the fuse with a new fuse of the same
type.
4. Place the back cover and the battery door
back and fasten the screws.
18
Содержание
- User manual 1
- And limitation of liability 2
- Customers enjoy one year warranty 2
- Failures caused by use outside of the 2
- Limited warranty 2
- Lcd display 3
- Table of contents page 3
- Test diodes 2 3
- Maintenance 7 4
- Introduction 5
- Look for cracks or missing plastic carefully look 5
- Personal injury please read all safety information 5
- Rms a lcd display and a backlight 5
- Safety information 5
- To the line being measured do not touch the 6
- When the input is out of range 6
- Instrument overview 7
- ③ relative mode 7
- Auto range the product selects 8
- Sinusoidal and nonsinusoidal ac 8
- ⑫ voltage test volt 8
- ⑲ alternating current 8
- Backlight automatically turns off after 2 9
- Frequency duty cycle 9
- As a reference for subsequent readings the 10
- Power off press the sel button or 11
- Turn off the product at this position 11
- Ac voltage 750v 12
- Celsius 20 1000 12
- Duty cycle from 1 99 12
- Measurements instruction 14
- Terminal and the red lead to the ma μ a 14
- Terminal and the red lead to the vωhz 14
- Connect the black test lead to the com 16
- Resistance is lower than 50ω which indicates a 16
- Turn the rotary switch to press select 16
- Read the forward bias voltage value on the 17
- Three times to toggle to the capacitance mode 17
- Connect the black thermocouple probe to the 19
- Read the measured duty cycle value on the 19
- Turn the rotary switch to press select 19
- Are qualified to do so and have the relevant 21
- Clean the product 21
- Maintenance 21
- Product 21
- Loosen the four screws on the back cover and 22
- Of the same type 22
- Place the back cover and the battery door 22
- General specifications 23
- Operating 23
- Specifications 23
- Electrical specifications 24
- Mv 0 01mv 24
- 9μa 0 1μa 25
- Μa 0 μa 25
- Capacitance 26
- Function range resolution accuracy 26
- Mhz 0 01mhz 26
- Μf 0 01μf 26
- Continuity 27
- Function range resolution accuracy 27
Похожие устройства
- Zotek ZT-111 Инструкция по эксплуатации
- Zotek ZT-102A Инструкция по эксплуатации
- Zotek ZT-S1 Инструкция по эксплуатации
- Zotek ZT-303 Инструкция по эксплуатации
- Zotek ZT-102 Инструкция по эксплуатации
- Zotek ZT-M1 Инструкция по эксплуатации
- Zotek ZT-109 Инструкция по эксплуатации
- Zotek ZT-A6 Инструкция по эксплуатации
- Zotek ZT-98 Инструкция по эксплуатации
- Zotek ZT-100 Инструкция по эксплуатации
- Zotek ZT-101 Инструкция по эксплуатации
- Zotek ZT-C1 Инструкция по эксплуатации
- Zotek ZT-C2 Инструкция по эксплуатации
- Zotek ZT-C3 Инструкция по эксплуатации
- Zotek ZT-C4 Инструкция по эксплуатации
- Zotek ZT-S2 Инструкция по эксплуатации
- Yli Electronic YK-1068B Спецификация
- Zotek ZT-S3 Инструкция по эксплуатации
- Zotek ZT-S4 Инструкция по эксплуатации
- Zotek ZT-301 Инструкция по эксплуатации