PRESONUS S1 Artist 3.0 [260/307] Edit pitch filter and amplifier envelopes

Edit Pitch, Filter, and Amplifier Envelopes

The output of each sample loaded in SampleOne can be modified with pitch, filter, and amplifier envelopes. Note the [Edit

All] button, which allows the simultaneous editing of all sample parameters at once when engaged. The following

describes the use of these envelopes.

Pitch Envelope Modifies the pitch characteristics of the audio output. Click the button in the upper left corner of

the module to activate/deactivate the effects of this envelope.

Tune Adjusts the tuning of the sample. Variable from -100 cents to 100 cents.

LFO Adjusts the range within which the LFO affects pitch. Variable from -1 octave to 1 octave.

Env Adjusts the range within which the envelope affects pitch. Variable from -1 octave to 1

octave.

Attack (A) Adjusts the amount of time it takes to reach the Env value from the original pitch of the

sample once a sample has been triggered. Variable from 0.98 ms to 1,024 s.

Decay (D) Adjusts the amount of time it takes to reach the sustain level after reaching full volume. Vari-

able from 0.98 ms to 1,024 s.

Sustain (S) Adjusts the Sustain level. Variable from -64 dB to 0 dB. The sustain period continues until

the sample trigger stops.

Release (R) Adjusts the amount of time it takes to reach the original pitch after sample trigger has

stopped. Variable from 0.98 ms to 1,024 s.

Filter Envelope Modifies the frequency characteristics of the audio output. Click the button in the upper left

corner of the module to activate/deactivate the effects of this envelope.

Cutoff Adjusts the filter cutoff frequency. Variable from 19.4 Hz to 19.913 kHz.

Velo Adjusts the maximum range, in octaves, within which note velocity can affect the maximum

filter range (the value used when velocity equals 127).

Wheel Adjusts the range, expressed as distance in octaves, within which the modulation wheel

on your Keyboard can adjust the instantaneous filter cutoff frequency (the value used when the

mod wheel value equals 127).

LFO Adjusts the range within which the LFO affects the cutoff frequenecy. Variable from -6.7

octaves to 6.7 octaves.

Env Adjusts the range within which the envelope affects the cutoff frequency. Variable from -10

octaves to 10 octaves.

Reso Adjusts the relative resonance of the filter. Variable from 0 to 100.

Type Selects the filter type. Choose from LP, BP, and HP and between 12 and 24 dB.

Attack (A) Adjusts the amount of time it takes for the filter cutoff frequency to move from the frequency

value to the envelope value once a sample has been triggered. Variable from 0.98 ms to 101.6 s.

Decay (D) Adjusts the amount of time it takes to reach the sustain level after reaching the envelope

value. Variable from 0.98 ms to 101.6 s.

Sustain (S) Adjusts the sustain level, which is the mix of the signal filtered at the envelope value with the

signal filtered at the frequency value. Variable from -96 dB to 0 dB. The sustain period continues until the

sample trigger stops.

Release (R) Adjusts the amount of time it takes the filter to reach the frequency value after the sample

trigger has stopped. Variable from 0.98 ms to 101.6 s.

Amplifier Envelope Modifies the amplitude characteristics of the audio output. Click the button in the upper left

corner of the module to activate/deactivate the effects of this envelope.

CHAPTER 14│Studio One Reference Manual