Tesla TT34EXC1-1232IA [42/64] Auto mode

ENG

Cooling mode

Heating mode

Dry mode

Fan mode (not FAN button)

Auto mode

To activate the cooling function (COOL) , press the MODE button until

the symbol COOL appears on the display.

The cooling function is activated by setting the button

or at a

temperature lower than that of the room.

To optimize the function of the Air conditioner, adjust the temperature

(1), the speed (2) and the direction of the air ﬂow (3) by pressing the

button indicated.

To activate the heating function (HEAT) , press the MODE button until the symbol HEAT appears on the display.

With the button

or set a temperature higher than that of the room.

To optimize the function of the Air conditioner adjust the temperature (1), the speed (2) and the direction of the air

ﬂow (3) by pressing the button indicated.

To set the DRY mode, Press MODE until DRY appears in the display. An automatic function of alternating cooling

cycles and air fan is activated.

To set the FAN mode, Press MODE until FAN appears on the display.

To activate the AUTO mode of operation, press the MODE button on the remote controller until the symbol

AUTO appears on the display. In AUTO mode , the air conditioner will run automatically according to the room

temperature.

In HEATING operation, the appliance can automatically activate a defrost cycle, which is

essential to clean the frost on the condenser so as to recover its heat exchange function.

This procedure usually lasts for 2-10 minutes during defrosting,indoor unit fan stop

operation. After defrosting ,it resumes to HEATING mode automatically.

WARNING!

The cooling function allows the air condit- ioner to cool

the room and at the same time reduces Air humidity.

The heating function allows the air conditi- oner to heat

the room.

This function reduces the humid- ity of the air to make the

room more comfortable.

The air conditioner works in only ventilation.

Automatic mode.