MOTU Micro Lite Руководство по эксплуатации онлайн [104/166] 776062

CLOCKWORKS FOR MAC OS 9

104

To convert an audio click into MIDI:

1 Be sure that the audio click source is connected to the

PEDAL phone jack on your Express interface as shown in

Figure 2-7 on page 14.

2 Open the Pedal window from the Windows menu in

ClockWorks.

3 Under Pedal Type, select Click-to-MIDI.

The click-to-MIDI options appear.

Figure 6-47: The click-to-MIDI options.

4 Adjust the Threshold and Decay options as needed as

you experiment with the response.

The decay and threshold settings are meant to prevent

doubled attacks. The decay is the amount of time your

Express interface will wait before it begins scanning for

another click. The decay can be set from 1 to 15. Set the

decay as high (long) as possible to prevent false attacks,

but low (short) enough so that it won’t miss the next true

click. Fast tempos require a low decay; you can afford to

use a higher decay for slow tempos.

5 Under “Convert click to:”, choose the data type you

wish to generate from the click.

You have three categories here: Note, Controller, and Hex.

The hex option lets you enter any MIDI event in its raw,

hexadecimal form as shown below, with a status byte

followed by data byte 1 and data byte 2.