MOTU Micro Lite Руководство по эксплуатации онлайн [111/166] 776062

FRONT PANEL PRESETS

111

MIDI data only to outputs 6, 7 and 8. Input 7 routes MMC

to the MIDI Express XT only. Input 8 does a combination

of inputs 6 and 7.

MIDI Machine/for the micro express

This preset provides MIDI data, time code, and MIDI

Machine Control settings for using MIDI Machine

Control between devices without a computer.

Inputs 1-2 are reserved for non-MMC devices being

routed to outputs 1-4, as well as the computer.

Input 3 is also routed to the computer but not to any of the

MIDI outputs.

MIDI outputs 5 and 6 are reserved for MIDI Machine

devices, as these ports are programmed to receive MIDI

Time Code and MMC transport commands from the

micro express.

MIDI inputs 3 and 4 are intended for MMC controller

devices, and they are each programmed slightly differently

to accommodate several different scenarios. Input 3 routes

MMC to the micro express only. Input 4 routes MIDI data

only to output 6.

Direct

This preset causes your Express interface to function like a

simple 1 IN/8 OUT or 1 IN/ 6 OUT MIDI interface,

respectively. All of the extra routing, merging, muting,

rechannelizing, and running status features are disabled.

Your Express interface applies no processing whatsoever

to MIDI data as it is sent to and from the computer. This

mode is referred to as Direct Connect mode through this

manual.

Input 1 connects to the computer, and the computer

connects to all 8 (or 6) outputs. But none of the inputs are

connected directly to the outputs.

This preset can be used effectively to solve problems with

non-standard MIDI data transfers. For example, some

samplers transmit sample dumps in a way that won’t work