Kurzweil FORTE [80/244] Saving a split

Program Mode

The Split Function

6-15

Pan

To change the panning of a Zone (left/right stereo placement), use the cursor buttons to

select the Pan parameter for one of the Zones. To set a Pan value, use the Alpha Wheel, the

Previous/Next buttons, or use the keypad function of the Category buttons to type a pan

value (0-127) followed by the Enter button. A value of 0 is full left, 64 is center, and 127 is

full right. Other values will move the stereo placement in between these positions. A value

of “None” will use the last pan value used by the Zone’s MIDI channel. A value of “None”

can be entered by scrolling below 0, or by using the keypad function of the Category buttons

to type negative 1 by pressing the +/- button and then the 1 button, followed by the Enter

button.

Saving a Split

After setting the Split parameters, the Split can be saved as a Multi so that it can easily be

recalled in Multi Mode. Press the Save button to the left of the display to begin the saving

process. A Multi name is automatically created using half of the right hand Program name

and half of the default left hand program name. is name can be edited during the saving

process.

See “Save User Multis” on page 8-15 in the Multi Mode Chapter for details on saving. Once

you have saved your Split as a Multi, you can continue to add Split or Layer Zones to the

Multi until you reach the maximum of four active Zones.

See e Split Function on page 8-9 and “e Layer Function” on page 8-12 in the Multi

Mode Chapter. Also, once you have saved your Split as a Multi, you can use Multi Edit

Mode to edit controller assignments (like eects controls and sustain pedal per Zone),

transposition per Zone, and other Multi parameters. (See “Multi Edit Mode” on page 9-1

for details.)