Ака Berkut-5 VERSION 5.01 [14/43] Ground balancing

To choose the coil profile desired press the buttons or

To select the profile activation press button [+].

To Adjust the coil. By pressing the button [+] the program enters the

automatic adjustment of the coil for the current coil profile selected.

To Add the new coil. By pressing the button[+] enters the program of automatic

adjustment of the selected coil profile (a Fig. 14).

Select Profile

Of coil

D9x12-14

[ ], [ ] - select

[+] - enter

Fig. 14

The choice of a profile of the gauge is carried out by buttons or , to start

automatic adjustment of the coil press the button [+].

Battery. Selects the type of batteries installed (p. 29).

GROUND BALANCING

Proper ground balancing is necessary in order to reduce the effects of ground

minerals on the detector. Without proper ground balance the detector cannot operate

to its full potential and can be subject to false signal from ground minerals.

To carry out a proper ground balance perform the following procedures:

1. Locate an area of ground that is free from any metal targets within a 4 foot diameter.

Use standard search mode with no discrimination to help locate clean ground;

2. Lift the coil to around waist level and

3. Press the button [GB]. The device will enter the automatic ground balance mode

( Fig. 15):

14 15