![D-Link DFL-600 Инструкция по эксплуатации онлайн [53/113] 17533](/img/pdf.png)
D-Link DFL-600 Инструкция по эксплуатации онлайн [53/113] 17533
![D-Link DFL-600 Инструкция по эксплуатации онлайн [53/113] 17533](/views2/1018598/page53/bg35.png)
Rip Version
Your DFL-600 can automatically discover routes
to destinations on both your LAN and the WAN
(Internet). You can choose either RIP1, RIP2 or
None. RIP2 (Routing Information Protocol
version 2) adds support for variable-length
subnet masks, and is generally the best choice.
Choosing None will disable the routing function
of your router, as will choosing Disabled for the
WAN or LAN RIP interface.
RIP Enabled
Interface
These two click boxes allow you to enable or
disable RIP for either the LAN or WAN
interface. Choosing Disabled for the WAN or
LAN RIP interface will disable the routing
function of your router.
Network Address
This is the IP address of either the LAN or WAN
side of your DFL-600.
Subnet Mask
This is the subnet mask corresponding to the
Network Address above.
Interface Name
This is the name of the interface corresponding
to the Network Address above.
Multicast Support
You can enable or disable multicast support. It
is recommended that you enable this feature.
Update Timer
This allows you to specify how often the DFL-
600 will update its routing table. The default is
30 seconds.
Timeout Timer
This allows you to specify how long a route
discovered by the DFL-600 will remain in its
memory without being used. The default is 180
seconds.
Garbage Collection
Timer
This allows you to specify the period of time
between the collection of garbage routes. The
default is 120 seconds.
Содержание
- D link dfl 600 1
- Firewall vpn 1
- Manual 1
- Package contents 3
- Introduction 4
- Front view 5
- Led indicators 5
- With firewall protection hacker attack logging and virtual private networking the dfl 600 provides a level of security suitable for many businesses this manual provides a quick introduction to network technology please take a moment to read through this manual and get acquainted with your dfl 600 5
- If you would like to use pppoe you will need the following values from your isp in order to install your router 8
- In order to install the dfl 600 you will need to check your computer s settings and the values from your isp the information offered by your isp 8
- Ip address settings and computer settings 8
- Note the router s default ip address setting is 192 68 dynamic ip settings 8
- The static ip settings for the pc 8
- Introduction and overview 9
- Using the configuration utility 12
- Setup wizard 14
- Wan settings 21
- Ip address 22
- Ip settings mode 22
- Lan settings 26
- Dhcp server status 28
- Dhcp settings 28
- Complications with using nat and some applications 31
- Network address translation 31
- Dmz host settings 33
- Dmz settings 33
- Ip address 33
- Dmz host ip address 34
- Global ip address 34
- System date time 35
- Time settings 35
- Time zone 35
- Authentication 36
- Bandwidth 38
- Logout timer 38
- Management type 38
- User control 38
- Add users 39
- Password 39
- User name 39
- Radius 40
- Server ip 40
- Server port 40
- Accounting port 42
- Authentication port 42
- Radius 42
- Server ip 42
- Accounting service 43
- Authentication method 43
- Secret key 43
- Ip segment address 45
- Ip segment mask 45
- Base dn 46
- Server ip 46
- Server port 46
- Advanced settings 47
- Network address translation 47
- Virtual servers 47
- Transport type 48
- Application gateway alg 49
- Application name 49
- Static routing 50
- Dynamic routing 52
- Policy firewall settings 54
- Policy rules 54
- Incoming packet filtering 55
- Port filter 55
- Transport type 57
- Key word filter 58
- Outgoing packet filtering 58
- Transport type 60
- Trusted domains 61
- Untrusted domains 61
- Blocked mac addresses 62
- Ipsec pass through 64
- Ipsec settings 64
- Ipsec tunnel mode 65
- Add new tunnel 66
- Tunnel table 70
- Ipsec status 71
- Pptp pass through 72
- Pptp status 72
- Vpn pptp settings 72
- Pptp account 73
- Pptp status 73
- L2tp pass through 74
- L2tp status 74
- Vpn l2tp settings 74
- L2tp account 75
- L2tp status 75
- Username 75
- Old password 77
- Tools administration 77
- Username 77
- Remote access 78
- Tools system 78
- Tools firmware 79
- Tools ping 80
- Update file 80
- Lan status 82
- Mac address 82
- Status device info 82
- Mac address 83
- Status nat info 83
- Wan status 83
- Intrusion log 84
- Private ip address port 84
- Status log info 84
- Blocking log 85
- Intrusion type 85
- Session log 86
- Transport type source 86
- Black list 87
- Source port 87
- Source ip 88
- Ipsec log 89
- Negotiation p1 89
- Choose either the remote server or the local flash option 90
- Sys log 90
- Mail alert 91
- Mail subject 91
- Recipient e mail 91
- Remote server ip 91
- Schedule 91
- Smtp server ip 91
- Sys log level 91
- Status traffic log 92
- Connecting pcs to the dfl 600 router 93
- Networking basics 96
- Contacting technical support 110
- Limited warranty and registration 111
- Register your d link product online at http www dlink com sales reg 113
Похожие устройства
- Electrolux EFH/S-2400M Инструкция по эксплуатации
- Gorenje GI52420AX Инструкция по эксплуатации
- Panasonic NV-VS3EN Инструкция по эксплуатации
- Panasonic LUMIX DMC-S2 Инструкция по эксплуатации
- Korg EC100 Инструкция по эксплуатации
- Defender OPTIMUM 115 Nano Инструкция по эксплуатации
- D-Link DFL-700 Инструкция по эксплуатации
- Gorenje GI 63398 BW Инструкция по эксплуатации
- Vitek VT-2131 Инструкция по эксплуатации
- Panasonic LUMIX DMC-SZ1 Инструкция по эксплуатации
- Korg EA-1 Инструкция по эксплуатации
- Panasonic NV-S88E Инструкция по эксплуатации
- D-Link DFL-800 Инструкция по эксплуатации
- Gorenje GI 63398 BBR Инструкция по эксплуатации
- Panasonic LUMIX DMC-SZ7 Инструкция по эксплуатации
- Korg DT-7 Инструкция по эксплуатации
- Panasonic NV-RZ2EN Инструкция по эксплуатации
- Protherm WH B200Z 1170 Инструкция по эксплуатации
- D-Link DFL-860 Инструкция по эксплуатации
- Gorenje GI 63398 BX Инструкция по эксплуатации