![D-Link DFL-600 [60/113] Transport type](/img/pdf.png)
D-Link DFL-600 [60/113] Transport type
![D-Link DFL-600 [60/113] Transport type](/views2/1018598/page60/bg3c.png)
•
(Int
•
run
pro
• en remo
The following fields can be configured for the current Out policy.
Transport Type
This drop-down menu allows you to specify the
P,
The default firewall port filter rules on the DFL-600 are:
Allow all outbound packets to pass through the router to the WAN
ernet).
Allow inbound packets only for a virtual server on your LAN
ning the FTP, SSH, TELNET, SMTP, POP3, or LDAP
tocols.
D y te access to the DFL-600 from the WAN (Internet)
transport protocol that will be filtered by the
DFL-600. You can choose from the TCP, UD
ICMP, IGMP, GRE, AH, ESP, and IPCOMP
protocols.
Protocol
lect from a list of commonly used
the
ng
or example, the Simple Mail Transfer Protocol
You can se
protocols from this drop-down menu. This is
equivalent of entering the correct Transport
Type and the correct port number correspondi
to a given protocol. The difference here is that
the protocol is identified by name.
F
(SMTP in the drop-down menu) is used to send
and receive e-mail. It uses the TCP transport
protocol and port number 25. This information
will be entered for you, if you select SMTP from
the Protocol drop-down menu.
Port Range
mbers for which
You can enter a range of port nu
the current policy rules will be applied. If you
have only one port number to enter, enter it in
both fields.
Direction
ou to specify the source of network
This allows y
traffic for which the current policy entry will be
applied − from the Internet (Inbound), or from
your LAN (Outbound).
Содержание
- D link dfl 600 1
- Firewall vpn 1
- Manual 1
- Package contents 3
- Introduction 4
- Front view 5
- Led indicators 5
- With firewall protection hacker attack logging and virtual private networking the dfl 600 provides a level of security suitable for many businesses this manual provides a quick introduction to network technology please take a moment to read through this manual and get acquainted with your dfl 600 5
- If you would like to use pppoe you will need the following values from your isp in order to install your router 8
- In order to install the dfl 600 you will need to check your computer s settings and the values from your isp the information offered by your isp 8
- Ip address settings and computer settings 8
- Note the router s default ip address setting is 192 68 dynamic ip settings 8
- The static ip settings for the pc 8
- Introduction and overview 9
- Using the configuration utility 12
- Setup wizard 14
- Wan settings 21
- Ip address 22
- Ip settings mode 22
- Lan settings 26
- Dhcp server status 28
- Dhcp settings 28
- Complications with using nat and some applications 31
- Network address translation 31
- Dmz host settings 33
- Dmz settings 33
- Ip address 33
- Dmz host ip address 34
- Global ip address 34
- System date time 35
- Time settings 35
- Time zone 35
- Authentication 36
- Bandwidth 38
- Logout timer 38
- Management type 38
- User control 38
- Add users 39
- Password 39
- User name 39
- Radius 40
- Server ip 40
- Server port 40
- Accounting port 42
- Authentication port 42
- Radius 42
- Server ip 42
- Accounting service 43
- Authentication method 43
- Secret key 43
- Ip segment address 45
- Ip segment mask 45
- Base dn 46
- Server ip 46
- Server port 46
- Advanced settings 47
- Network address translation 47
- Virtual servers 47
- Transport type 48
- Application gateway alg 49
- Application name 49
- Static routing 50
- Dynamic routing 52
- Policy firewall settings 54
- Policy rules 54
- Incoming packet filtering 55
- Port filter 55
- Transport type 57
- Key word filter 58
- Outgoing packet filtering 58
- Transport type 60
- Trusted domains 61
- Untrusted domains 61
- Blocked mac addresses 62
- Ipsec pass through 64
- Ipsec settings 64
- Ipsec tunnel mode 65
- Add new tunnel 66
- Tunnel table 70
- Ipsec status 71
- Pptp pass through 72
- Pptp status 72
- Vpn pptp settings 72
- Pptp account 73
- Pptp status 73
- L2tp pass through 74
- L2tp status 74
- Vpn l2tp settings 74
- L2tp account 75
- L2tp status 75
- Username 75
- Old password 77
- Tools administration 77
- Username 77
- Remote access 78
- Tools system 78
- Tools firmware 79
- Tools ping 80
- Update file 80
- Lan status 82
- Mac address 82
- Status device info 82
- Mac address 83
- Status nat info 83
- Wan status 83
- Intrusion log 84
- Private ip address port 84
- Status log info 84
- Blocking log 85
- Intrusion type 85
- Session log 86
- Transport type source 86
- Black list 87
- Source port 87
- Source ip 88
- Ipsec log 89
- Negotiation p1 89
- Choose either the remote server or the local flash option 90
- Sys log 90
- Mail alert 91
- Mail subject 91
- Recipient e mail 91
- Remote server ip 91
- Schedule 91
- Smtp server ip 91
- Sys log level 91
- Status traffic log 92
- Connecting pcs to the dfl 600 router 93
- Networking basics 96
- Contacting technical support 110
- Limited warranty and registration 111
- Register your d link product online at http www dlink com sales reg 113
Похожие устройства
- Electrolux EFH/S-2400M Инструкция по эксплуатации
- Gorenje GI52420AX Инструкция по эксплуатации
- Panasonic NV-VS3EN Инструкция по эксплуатации
- Panasonic LUMIX DMC-S2 Инструкция по эксплуатации
- Korg EC100 Инструкция по эксплуатации
- Defender OPTIMUM 115 Nano Инструкция по эксплуатации
- D-Link DFL-700 Инструкция по эксплуатации
- Gorenje GI 63398 BW Инструкция по эксплуатации
- Vitek VT-2131 Инструкция по эксплуатации
- Panasonic LUMIX DMC-SZ1 Инструкция по эксплуатации
- Korg EA-1 Инструкция по эксплуатации
- Panasonic NV-S88E Инструкция по эксплуатации
- D-Link DFL-800 Инструкция по эксплуатации
- Gorenje GI 63398 BBR Инструкция по эксплуатации
- Panasonic LUMIX DMC-SZ7 Инструкция по эксплуатации
- Korg DT-7 Инструкция по эксплуатации
- Panasonic NV-RZ2EN Инструкция по эксплуатации
- Protherm WH B200Z 1170 Инструкция по эксплуатации
- D-Link DFL-860 Инструкция по эксплуатации
- Gorenje GI 63398 BX Инструкция по эксплуатации