Moxa DA-683-SP-LX [9/47] Da 683 hardware introduction

DA-683 Hardware Introduction

1-6

Switches and Buttons

Power Switch: on/off (on rear panel)

Reset Button: To reset system hardware (on front panel)

Physical Characteristics

Housing: SECC sheet metal (1 mm)

Weight: 4 kg

Dimensions: 315 x 440 x 90 mm (12.40 x 17.32 x 3.54 in) (without rackmount ears)

Mounting: Standard 19-inch rackmount

Environmental Limits

Operating Temperature:

Standard models: -10 to 60°C (14 to 140°F)

DPP-T models: -40 to 70°C (-40 to 158°F)

Storage Temperature:

Standard models: -20 to 80°C (-4 to 176°F)

DPP-T models: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity: 5 to 95% (non-condensing)

Anti-vibration: 7 mm (2-9 Hz), 20 m/s/s (9-200 Hz), 15 m/s/s (200-500 Hz) @ IEC-61850-3,

IEC 60870-2-2/Cm/(3M6)/(4M6), sine wave, 2-500 Hz, 1 Oct/min, 10 cycles, 2 hrs 40 mins per axis

Anti-shock: 300 m/s2 @ IEC-61850-3, IEC 60870-2-2/Cm/(3M6)/(4M6), half sine wave, 11 ms

Power Requirements

Input Voltage: 100 to 240 VAC, 50/60 Hz, 0.9-0.4 A

Power Consumption: 40 W

Standards and Certifications

Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD (EN60950-1), CCC (GB4943)

EMC: CE (EN55022, EN61000-3-2, EN61000-3-3, EN55024), FCC (Part 15 Subpart B, CISPR 22 Class ),

CCC (GB9254, GB 17625.1)

Green Product: RoHS, CRoHS, WEEE

Power Automation: IEC 61850-3 (DPP-T models only)

Reliability

Alert Tools: Built-in buzzer and RTC (real-time clock) with lithium backup battery

Automatic Reboot Trigger: Built-in WDT (watchdog timer) supporting 1-255 level time interval system

reset, software programmable

MTBF (meantime between failures): 134,407 hrs

Warranty

Warranty Period: 3 years

Details: See www.moxa.com/warranty

Non-standard Baudrates

Moxa’s UART ASIC supports most non-standard baudrates in the range 50 bps to 921.6 Kbps. In fact,

supported baudrates are much denser towards the lower values. For example, no baudrates are supported

between the integers 5320 and 5323, but 49 baudrates are supported between the integers 387 and 388. Of

course this is the way it should be, since serial devices that require using non-standard baudrates generally use

slower baudrates.

Before using a serial device that requires using a non-standard baudrate, you must first check that the DA-683

supports a baudrate within the tolerance specified by the serial device manufacturer.

Use the following formula to calculate which baudrates are supported by the DA-683:

(A) Baudrate = 921600/(N+M/8) bps, for N = 1, 2, …, 18431, M = 0, 1, 2, …, 7

(B) Baudrate = 8 x 921600/K bps, for K = 8, 9, …, 147456

Moxa DA-683-SP-LX [9/47] Da 683 hardware introduction

Содержание

Похожие устройства