Moxa ioLogik W5312-T [42/194] The lan settings panel

ioLogik W5300 The ioAdmin Utility

3-14

NOTE

The

server also relates to the node created in the Active OPC Server.

The LAN Settings Panel

The LAN Settings panel is available after you log in as administrator. You will be able to configure IP,

Modbus/TCP Alive Check Timeout, DNS, and SNMP settings.

IP Settings

You can set up a static or dynamic IP address for the ioLogik, as well as a subnet mask and gateway address.

To allow only authorized IP addresses to have access to the ioLogik and attached sensors, click Accessible IP.

Access will be granted only to addresses listed in the Accessible IP screen. Any requests from sources that are

not on the accessible IP list will be unable to use Modbus/TCP or ioAdmin to access the ioLogik.

Modbus/TCP Alive Check Timeout Settings

Modbus/TCP Alive Check Timeout is designed to avoid TCP congestion due to a connection failure. If the

network host is unable to respond due to a hardware failure or a network problem, the ioLogik will continue to

wait for a response from the host. This will cause the TCP port to be occupied indefinitely by the host. On the

other hand, if an idle connection timeout interval is enabled for Modbus/TCP, then when the ioLogik’s connection to the

server exceeds a specified time period the device will automatically release its modbus/TCP connection to the server, freeing

up the port for a new connection.

DNS Settings

Use this field to specify the IP addresses of one or two DNS servers. DNS servers can be used to find available

e-mail addresses when setting up Click&Go rules. By default, DNS is set to automatic. If you want to configure

a specific setting, contact your local cellular provider for details.