Moxa ioLogik W5312-T [81/194] Defining global variables

ioLogik W5300 Click&Go Logic

4-9

Defining Global Variables

Global Variables include Internal Register Settings, Timer Settings, SNMP Trap Server, E-Mail Server,

Active Message Server and SMS Phone Book. If these functions will be used in a Click&Go V2 rule-set, the

default configuration must first be set from the Global Variable Menu Bar.

The following global variables are only supported by the ioLogik W5300:

SMS Phone Book, Working/Off Working Day, FTP, Data Logging Profile List, and Internal Register

(Float).

Internal Register (Integer) Settings

Internal Register (Integer) is a flag that can be used with the Click&Go logic internally or externally. The 24

sets of internal registers can be polled and controlled by SCADA software using standard Modbus/TCP format,

or implemented to redirect the result of one Click&Go logic to another.

The default value of an internal register is “0”.

Internal Register Reg-0 to Reg-23 *0 to 255

Timer Settings

The Timer function allows users to delay an action, trigger an action to run, or repeat an action. A timer is

activated by a change of the logic event. After the timed interval has expired, the output will be performed.

The 24 timers that can be implemented with Click&Go V2 logic have the default time interval set to “5 seconds”

in the “STOP” state. Be sure to configure the interval before using a timer.

With the default state set to “START” the timer will start when the Click&Go logic is activated.

Timer Number Initial State Configuration

Timer Timer-0 to Timer-23 START, *STOP