Netgear WNR612 — настройки беспроводного роутера: расширенные параметры и управление [60/99]

Превью страниц Страница 60 / 99

Advanced Settings

N150 2-Port Wireless Router WNR612v3

Advanced Wireless Settings

 To go to the Advanced Wireless Settings screen:

Select Advanced > Advanced Setup > Wireless Settings to display the following

screen:

The following settings are available in this screen:

Enable Wireless Router Radio.

You can completely turn off the wireless portion of the

wireless router by clearing this check box. Select this check box again to enable the wireless

portion of the router. When the wireless radio is disabled, other members of your household

can use the router by connecting their computers to the router with an Ethernet cable.

Enable 20/40 MHZ Coexistence. By default, this check box is selected so that your wireless

network does not interfere with other wireless networks in your area.

This might reduce the

maximum speed of your 2.4GHz wireless to the half when there is another wireless network

detected in your environment. If you want to maintain maximum speed for your wireless

network regardless of other networks in your area, clear this check box and click Apply.

Note: The Fragmentation Length, CTS/RTS Threshold, and Preamble

Mode options are reserved for wireless testing and advanced

configuration only. Do not change these settings.

WPS Settings.Y

ou can add WPS devices to your network.

• Disable Router

’s PIN. The router’s PIN lets you use the WPS PIN method to join the

wireless network. Selecting this check box disables the PIN, which means the WPS PIN

method cannot be used.

• Keep Existing W

ireless Settings. By default this check box is selected so that when

WPS is used to join the wireless network, the router wireless settings do not change.

Wireless Card Access List. You can restrict access to your network to specific devices

based on their MAC address. See Restrict Wireless Access by MAC Address on page 61