Netgear WNR612 — настройка динамического DNS и статических маршрутов для роутера [74/99]

Превью страниц Страница 74 / 99

Advanced Settings

N150 2-Port Wireless Router WNR612v3

 To set up Dynamic DNS:

1. On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following

screen:

2. Register for an account with one of the Dynamic DNS service providers whose names

appear in the Service Provider list. For example, for DynDNS.org, select www.dyndns.org.

3. Select the Use a Dynamic DNS Service check box.

4. Select the name of your Dynamic DNS service provider

5. T

ype the host name (or domain name) that your Dynamic DNS service provider gave you.

6. T

ype the user name for your Dynamic DNS account. This is the name that you use to log in

to your account, not your host name.

7. T

ype the password (or key) for your Dynamic DNS account.

8. If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can

select the Use W

ildcards check box to activate this feature.

For example, the wildcard feature causes *.yourhost.dyndns.org to be aliased to the

same IP address as yourhost.dyndns.org.

9. Click Apply to save your configuration.

Static Routes

Static routes provide additional routing information to your router. Typically, you do not need

to add static routes. You have to configure static routes only for unusual cases such as

multiple routers or multiple IP subnets on your network.

As an example of when a static route is needed, consider the following case:

• Your primary Internet access is through a cable modem to an ISP.

• Y

ou have an ISDN router on your home network for connecting to the company where

you are employed. This router’s address on your LAN is 192.168.1.100.

• Y

our company’s network address is 134.177.0.0.

When you first configured your router, two implicit static routes were created. A default route

was created with your ISP as the gateway

, and a second static route was created to your

local network for all 192.168.1.x addresses. With this configuration, if you attempt to access a

device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP