Netgear WNR612 [38/99] Address reservation
![Netgear WNR612 [38/99] Address reservation](/views2/1205513/page38/bg26.png)
NETGEAR genie Advanced Home
38
N150 2-Port Wireless Router WNR612v3
LAN Setup Screen Settings
LAN TCP/IP Setup
• IP Address. The LAN IP address of the router.
• IP Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the
IP subnet mask allows a device to know which other addresses are local to it, and which
addresses have to be reached through a gateway or router.
• RIP Direction. Router Information Protocol (RIP) allows a router to exchange routing
information with other routers. This setting controls how the router sends and receives
RIP packets. Both is the default setting. With the Both or Out Only setting, the router
broadcasts its routing table periodically. With the Both or In Only setting, the router
incorporates the RIP information that it receives.
• RIP Version. This setting controls the format and the broadcasting method of the RIP
packets that the router sends. It recognizes both formats when receiving. By default, the
RIP function is disabled.
RIP-1 is universally supported. It is adequate for most networks, unless you have an
unusual network setup.
RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2
format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting.
Use Router as a DHCP Server
This check box is selected by default so that the router functions as a Dynamic Host
Configuration Protocol (DHCP) server.
• Starting IP Address. Specify the start of the range for the pool of IP addresses in the
same subnet as the router.
• Ending IP Address. Specify the end of the range for the pool of IP addresses in the
same subnet as the router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer receives
the same IP address each time it accesses the router’s DHCP server. Assign reserved IP
addresses to servers that require permanent IP settings.
Use the Router as a DHCP Server
By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default
gateway addresses to all computers connected to the LAN. The assigned default gateway
address is the LAN address of the router. The router assigns IP addresses to the attached
computers from a pool of addresses specified in this screen. Each pool address is tested
before it is assigned to avoid duplicate addresses on the LAN. For most applications, the
default DHCP and TCP/IP settings of the router are satisfactory.
Содержание
- N150 2 port wireless router wnr612v3 1
- User manual 1
- N150 2 port wireless router wnr612v3 2
- Statement of conditions 2
- Technical support 2
- Trademarks 2
- Chapter 1 hardware setup 3
- Chapter 2 getting started with netgear genie 3
- Chapter 3 netgear genie basic settings 3
- Chapter 4 netgear genie advanced home 3
- Contents 3
- Chapter 5 security 4
- Chapter 6 administration 4
- Chapter 7 advanced settings 4
- Appendix a supplemental information 5
- Appendix b notification of compliance 5
- Chapter 8 troubleshooting 5
- Getting to know your router 6
- Hardware setup 6
- Position your router 7
- Unpack your router 7
- Front panel 8
- Hardware features 8
- Back panel 9
- Ethernet internet 9
- Figure 3 router rear view 9
- Hardware setup 9
- N150 2 port wireless router wnr612v3 9
- Port lan ports 2 reset button 9
- Power connector 9
- Power on off 9
- See factory settings on page 89 for information about restoring factory settings 9
- Table 1 front panel led descriptions 9
- The back panel has the connections shown in the following figure 9
- The label on the bottom of the router shows the preset wifi network name and password login information mac address and serial number 10
- Connecting to the router 11
- Getting started with netgear genie 11
- Gather isp information 12
- Router setup preparation 12
- Types of logins and access 12
- Use standard tcp ip properties for dhcp 12
- Wireless devices and security settings 12
- Netgear genie setup 13
- Upgrade router firmware 14
- Use netgear genie after installation 14
- Router dashboard basic home screen 15
- Join your wireless network 16
- Netgear genie app and mobile genie app 16
- The genie mobile app works on your iphone ipad or android phone 17
- Netgear genie basic settings 18
- Your internet connection and network 18
- Basic home screen 19
- Internet settings 19
- Internet settings screen fields 20
- Attached devices 21
- Parental controls 22
- Basic wireless settings 24
- Region selection 25
- Wireless network 25
- Wireless settings screen fields 25
- Change wpa security option and passphrase 26
- Security options settings 26
- Guest networks 27
- Guest network wireless security options 28
- Wpa encryption 28
- Fastlane 29
- Netgear genie advanced home 30
- Specifying custom settings 30
- Netgear genie advanced screen 31
- Setup wizard 31
- Wps wizard 32
- Setup menu 33
- Wan setup 33
- Change the mtu size 35
- Default dmz server 35
- Lan setup 37
- Address reservation 38
- Lan setup screen settings 38
- Lan tcp ip setup 38
- Use router as a dhcp server 38
- Use the router as a dhcp server 38
- Address reservation 39
- Enable wmm qos for wireless multimedia applications 40
- Quality of service qos setup 40
- Set up qos for internet access 40
- Qos for applications and online gaming 41
- Qos for a router lan port 42
- Edit or delete an existing qos policy 43
- Qos for a mac address 43
- Keeping unwanted content out of your network 44
- Security 44
- Keyword blocking of http traffic 45
- Block services port filtering 46
- Schedule blocking 48
- Security event email notifications 49
- Administration 50
- Managing your network 50
- Upgrade the firmware 51
- Internet provider wan setup 52
- Router information 52
- View router status 52
- Statistics 53
- Connection status 54
- Wireless ap 55
- View logs of web access or attempted web access 56
- Back up settings 57
- Manage the configuration file 57
- Restore configuration settings 57
- Set password 58
- Advanced settings 59
- Advanced wireless settings 60
- Restrict wireless access by mac address 61
- Wireless repeating function wds 62
- Wireless repeating function 63
- Set up the base station 64
- Port forwarding and triggering 65
- Remote computer access basics 65
- Set up a repeater unit 65
- Port triggering to open incoming ports 67
- Port forwarding to permit external host communications 68
- How port forwarding differs from port triggering 69
- Set up port forwarding to local servers 69
- Add a custom service 70
- Application example making a local web server public 71
- Edit or delete a port forwarding entry 71
- Set up port triggering 71
- Dynamic dns 73
- Static routes 74
- Remote management 76
- Universal plug and play 77
- Traffic meter 78
- Troubleshooting 80
- Check ethernet cable connections 81
- Network settings 81
- Quick tips 81
- Sequence to restart your network 81
- Wireless settings 81
- Internet or ethernet port leds are off 82
- Power test led is off or blinking 82
- Troubleshooting with the leds 82
- Cannot access the internet 83
- Cannot log in to the router 83
- Wireless led is off 83
- Troubleshooting internet browsing 85
- Troubleshooting pppoe 85
- Changes not saved 86
- Wireless connectivity 86
- Wireless signal strength 86
- Restore the factory settings and password 87
- Test the lan path to your router 87
- Troubleshoot your network using the ping utility 87
- Test the path from your computer to a remote device 88
- A supplemental information 89
- Factory settings 89
- Supplemental information 89
- This appendix provides factory default settings and technical specifications for the n150 2 port wireless router wnr612v3 89
- You can return the router to its factory settings the end of a paper clip or a similar object to press and hold the reset button on the back of the router for at least 7 the router resets and returns to the factory configuration settings shown in the following table 89
- N150 2 port wireless router wnr612v3 90
- Supplemental information 90
- Table 3 factory default settings continued 90
- Table 4 wnr612v3 router specifications 90
- Technical specifications 90
- N150 2 port wireless router wnr612v3 91
- Supplemental information 91
- Table 4 wnr612v3 router specifications continued 91
- B notification of compliance 92
- Europe eu declaration of conformity 92
- Netgear wireless routers gateways aps 92
- Notification of compliance 92
- Regulatory compliance information 92
- N150 2 port wireless router wnr612v3 93
- Notification of compliance 93
- Fcc caution 94
- Fcc declaration of conformity 94
- Fcc guidelines for human exposure 94
- Fcc information to user 94
- Fcc radio frequency interference warnings instructions 94
- Fcc requirements for operation in the united states 94
- N150 2 port wireless router wnr612v3 94
- Notification of compliance 94
- Canadian department of communications radio interference regulations 95
- Caution 95
- Important note radiation exposure statement 95
- Industry canada 95
- Interference reduction table 95
- N150 2 port wireless router wnr612v3 95
- Note importante déclaration d exposition aux radiations 95
- Notification of compliance 95
- N150 2 port wireless router wnr612v3 97
- N150 2 port wireless router wnr612v3 98
- N150 2 port wireless router wnr612v3 99
Похожие устройства
- Netgear WNR3500L Инструкция по эксплуатации
- Netgear WNDR3400 Инструкция по эксплуатации
- Netgear DGND3300 Инструкция по эксплуатации
- Netgear WNR1000 Инструкция по эксплуатации
- Netgear DGN3500 Инструкция по эксплуатации
- Netgear DGN2200 Инструкция по эксплуатации
- Nec V230X Инструкция по эксплуатации
- Nec M230X Инструкция по эксплуатации
- Nec V260X Инструкция по эксплуатации
- Nec PA550W Инструкция по эксплуатации
- Nec U250X Инструкция по эксплуатации
- Nec U300X Инструкция по эксплуатации
- Nec M420X Инструкция по эксплуатации
- Nec PA600X Инструкция по эксплуатации
- Nec V260 Инструкция по эксплуатации
- Nec M300XS Инструкция по эксплуатации
- Nec P420X Инструкция по эксплуатации
- Nec M350XS Инструкция по эксплуатации
- Nec U310W Инструкция по эксплуатации
- Nec M350X Инструкция по эксплуатации