![Sony VPL-SX631 [30/106] The connection power menu is used for setting for the connections and power](/img/pdf.png)
Sony VPL-SX631 [30/106] The connection power menu is used for setting for the connections and power
![Sony VPL-SX631 [30/106] The connection power menu is used for setting for the connections and power](/views2/1308214/page30/bg1e.png)
30
The Connection/Power Menu
The Connection/Power Menu
The Connection/Power menu is used for setting for the connections and power.
Items Item descriptions
LAN Settings
IP Address
Setup
*9
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: To specify the IP Address manually.
WLAN Settings
*10
WLAN
Connection
*8
On/Off: Set the wireless output of the USB wireless LAN module (not
supplied) to On/Off.
WLAN
Network
*14
Access Pt./Client
*11
: Changes modes for WLAN.
*12
Network Presentation
Connection
CODE
On/Off: This is the presentation function via the network. It controls
the connection using the displayed number (CODE) on the right bottom
of the screen. During the image transmission, using the ENTER key on
the remote commander makes Connection CODE display again.
Display Setting
LAN Mode Displays the LAN settings of the projector or the settings
of the USB wireless LAN module that operates as a client
at the bottom right of the screen.
Wired: Displays the IP address of LAN preferentially.
Wireless: Displays the IP address of the USB wireless
LAN module preferentially.
AP Mode Displays the SSID of the USB wireless LAN module that
operates as an access point at the bottom right of the
screen.
Dynamic Range
*18
Sets the image input level of the INPUT C terminal.
Auto: Distinguishes the image input level automatically.
Limited: Set when the image input level is 16-235.
Full: Set when the image input level is 0-255.
Input-A Signal Sel.
Auto/Computer/Video GBR/Component:
When set to “Auto,” selects
the type of video signal input automatically when “Input-A” is selected.
*1
Содержание
- Data projector 1
- Operating instructions 1
- Vpl sw636c sw631c sw631 vpl sx631 1
- Adjustments and settings using a menu 2
- Interactive function 2
- Network 2
- Overview 2
- Preparation 2
- Projecting an image 2
- Table of contents 2
- Others 3
- Playing video and audio using usb connection 3
- Presentation function via network 3
- Usb media viewer 3
- Location and function of controls 4
- Main unit 4
- Overview 4
- Qs qd qf 4
- Terminals 5
- Remote commander and control panel keys 6
- F setting the energy saving mode easily 7
- G infrared transmitter 7
- A pen tip switch 8
- B color ring 8
- C indicator 8
- D button 8
- E battery cover 8
- F strap attachment hole 8
- Interactive pen device vpl sw636c sw631c only 8
- B preparation 9
- Connecting a computer 9
- Connecting the projector 9
- Preparation 9
- For connecting to a computer tablet pc or smartphone via a hub or router presentation function via network page 59 10
- For connecting to a computer with a usb terminal playing video and audio using usb connection page 67 10
- Lan terminal 10
- Usb terminal type b 10
- Use hdmi compatible equipment which has the hdmi logo use a high speed hdmi cable s on which the cable type logo is specified sony products are recommended the hdmi terminal of this projector is not compatible with dsd direct stream digital signal or cec consumer electronics control signal 10
- Connecting a video equipment 11
- Connections with a vhs video deck dvd player or bd player are explained for each input signal 11
- For connecting a usb wireless lan module ifu wlm3 not supplied presentation function via network page 59 11
- For connecting video equipment with an s video output terminal 11
- S video in 11
- Usb terminal type a 11
- For connecting video equipment with a video output terminal 12
- For connecting video equipment with a y 12
- For connecting video equipment with an hdmi output terminal 12
- Input a 12
- Input c 12
- Output terminal 12
- Use hdmi compatible equipment which has the hdmi logo use a high speed hdmi cable s on which the cable type logo is specified sony products are recommended the hdmi terminal of this projector is not compatible with dsd direct stream digital signal or cec consumer electronics control signal 12
- Video in 12
- Connecting a microphone 13
- Connecting a usb memory device 13
- Connecting an external monitor and audio equipment 13
- For connecting a microphone 13
- For connecting a usb memory device using usb media viewer page 69 13
- Microphone 13
- Only dynamic microphones are supported 13
- Output 13
- Projected images and audio can be output 13
- Projected images or input audio can be output to display equipment such as a monitor or audio equipment such as speakers with a built in amplifier 13
- Usb terminal type a 13
- B projecting an image 14
- Projecting an image 14
- Adjust the focus size and position of the projected image page 16 15
- Open the side cover 15
- Adjusting the projected image 16
- Focus size zoom 16
- Projecting an image 16
- Adjusting the tilt of the projector with the feet 17
- You can adjust the height of the projector using the feet by changing the tilt of the projector with feet you can adjust the position of the projected image 17
- Changing the aspect ratio of the projected image 18
- Correcting trapezoidal distortion of the projected image keystone feature 18
- If the image becomes trapezoidal set the keystone manually 18
- Press the aspect key on the remote commander to change the aspect ratio of the projected image you can also change the setting in aspect of the screen menu pages 23 25 18
- Automatically adjusting phase pitch and shift of the projected image while a signal is input from a computer apa auto pixel alignment 19
- Displaying a pattern 19
- Fitting the projected image to the screen digital shrink adjustment 19
- If the projected image exceeds the size of the screen you can shrink and adjust the position of it 19
- Press the apa key on the remote commander press again to cancel adjusting during the setting you can also set apa in the screen menu page 24 if smart apa in the function menu is set to on executes apa automatically when a signal is input page 27 19
- You can display a pattern for adjusting the projected image or a grid pattern with the pattern key on the remote commander press the pattern key again to restore the previous image you can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard or blackboard without using a computer 19
- Eco gauge 20
- Press the 1 key on the unit or the remote commander 20
- Turning off the power 20
- Turning off without displaying the confirmation message 20
- Unplug the ac power cord from the wall outlet 20
- Adjustments and settings using a menu 21
- B adjustments and settings using a menu 21
- Using a menu 21
- The picture is used to adjust the picture for each input signal 22
- The picture menu 22
- The screen menu 23
- The screen menu is used to adjust the size position and aspect ratio of the projected image for each input signal 23
- Aspect 25
- Vpl sw636c sw631c sw631 25
- Vpl sx631 26
- The function menu 27
- The function menu is used for setting various functions of the projector 27
- The operation menu 29
- The operation menu is used for setting for the operations by using the menu or the remote commander 29
- The connection power menu 30
- The connection power menu is used for setting for the connections and power 30
- The installation menu 33
- The installation menu is used for installing the projector 33
- 1 these items may not be displayed depending on the input signal 34
- The information menu 34
- The information menu is used to check projector status such as total usage time of the lamp 34
- Notes when using pc free interactive function vpl sw636c only 35
- When using the pc free interactive function the items of the picture menu and the screen menu work to the background images from the external devices however they do not work to the drawing data with interactive pen device or the whiteboard mode for detatils see the list below 35
- Displaying the control window of the projector with a web browser 36
- Network 36
- Using network features 36
- Confirming the information regarding the projector 37
- How to operate the control window 37
- E mail report 38
- Enter the outgoing e mail address in the email address box then check the report timing check box of the e mail report to be sent 38
- Operating the projector from a computer 38
- Set the mail account for sending e mail reports 38
- Set the timing of the e mail report 38
- Using the e mail report function 38
- Setting the lan network of the projector 39
- A input the settings for access point mode 40
- Click the wlan setting to open the wlan setting page 40
- Enable or disable the radio wave output of usb wireless lan module 40
- Setting the wlan network of the projector 40
- B input the settings for client mode 41
- Connection status displays the connecting status between the access point and projector ssid input the ssid of access point the projector tries to connect to encryption type select the security method of access point the projector tries to connect to from the following list 41
- Key input the password for security method of the access point according to the selected encryption type as below 41
- Obtain an ip address automatically automatically provides the network settings by a dhcp server function such as the router the ip address subnet mask default gateway primary dns and secondary dns display the values provided by a dhcp server specify an ip address set the network manually ip address input the ip address of the projector 41
- The factory setting of the security method and its password are set as follows security method wep 64bit password sony1 41
- When the usb wireless lan module is activated as a client set the items for the client set the items for the access point the projector tries to connect to 41
- Click on advanced menu to open the setup page 42
- Click on apply to apply the set label names 42
- Click on input label and open the input label setting window clear the check box for the label that you want to change and input the label name you can input up to 20 of the following letters 42
- Setting the control protocol of the projector 42
- Setting the custom labels for the input terminals of the projector 42
- A set advertisement 43
- B set pj talk 43
- Click on advanced menu to display the buttons for more settings 43
- C set pj link 44
- D set the system service 44
- E reset the network settings 45
- B interactive function 46
- Interactive function 46
- Using interactive presentation utility 2 vpl sw636c sw631c only 46
- Close all running applications 47
- Connecting a computer with a usb cable 47
- For windows 47
- Insert the supplied cd rom into the cd rom drive of the computer open the cd rom and double click interactive presentation utility 2 exe 47
- Installing interactive presentation utility 2 47
- Connect the projector and computer with the av cable and usb cable page 47 and project the image with the projector 48
- Follow the on screen instructions to install the software 48
- Set interactive mode to pc interactive in interactive vpl sw636c only 48
- Setting interactive presentation utility 2 48
- Start interactive presentation utility 2 48
- Taskbar 48
- Close all running applications 50
- Connect the projector and computer with the av cable and usb cable page 47 and project the image with the projector 50
- Follow the on screen instructions to install the software 50
- For mac 50
- In the cd rom double click interactive presentation utility 2 pkg 50
- Installing interactive presentation utility 2 50
- Set interactive mode to pc interactive in interactive vpl sw636c only 50
- Setting interactive presentation utility 2 50
- Start interactive presentation utility 2 50
- Setting the pc free interactive function 52
- Toolbars and icons 52
- Using the pc free interactive function vpl sw636c only 52
- Calibration aligns the points where the pen main and sub is pointing and where the projector displays the cursor on the screen calibration auto allows you to perform the calibration automatically if you select calibration manual main or calibration manual sub you can perform the calibration manually if you display the menu or the warning caution messages etc are displayed during the calibration calibration will stop in addition if you stop operating the calibration for more than 20 seconds the manual calibration will also stop if the calibration fails will be displayed on the calibration icon in this case perform manual adjustment as needed 53
- Dual user dual pen calibration auto manual 53
- Main pen toolbar 53
- Pen tracking speed adjustment 53
- Sub pen toolbar 53
- Tracking speed of the interactive pen device can be adjusted if you are concerned about shakes in drawn lines set it toward slow however setting toward slow results in a slow response when you draw fast if you set auto the pen tracking speed is automatically adjusted according to the drawing speed 53
- Management tools 54
- Pen detection sensitivity adjustment 54
- Drawing tools 55
- Select template whiteboard mode only 55
- Add delete template images to from the projector 57
- Clock display 57
- Connect the computer and projector with a usb cable page 47 57
- Connect the computer and projector with the usb cable page 47 57
- Interactiv 57
- Interactive mod 57
- Off data export 57
- Open the savedpng folder in the hard disc drive to copy the necessary files to the computer 57
- Open the templates folder to add delete the png file 57
- Page 27 57
- Retrieve the data saved in the projector 57
- Operations of interactive pen device while using mouse mode 58
- Setting the mouse mode 58
- Using the mouse mode function vpl sw636c only 58
- Installing projector station for network presentation 59
- Presentation function via network 59
- Starting projector station for network presentation 59
- Using presentation function via network 59
- A for lan mode 60
- Projecting an image 60
- Select the connection method 60
- Set the projector an image will be projected t 60
- Start projector station for network presentation 60
- B for ap mode 61
- Click connect 61
- Connection settings 61
- Code 1234 62
- Network presentation 62
- One click projecting function 62
- User 000001 62
- Using the controller 62
- Access pt auto can be selected on the compatible models only this model is not compatible for the settings of access pt auto 63
- Command examples example 1 if the settings of the projector that you want the computer to connect to are set as below and you want to display an image when the computer starts connecting to it network lan mode ip address 192 68 87 connection code on 63
- Command format 63
- For ap mode wifi ssid wireless password code display setting 63
- For lan mode 63
- For mac 63
- For mac input the settings of the projector that you want the computer to connect to in the created text file and save refer to the command format in the option format to input settings right click the created text file and select get info from the context menu change the extension of the filename that is displayed on name extension to npr 63
- For windows 63
- For windows register the settings right click the created shortcut and select properties from the pop up menu input the settings of the projector that you want the computer to connect to in target from the shortcut tab and save for the format for the settings refer to the command formats in the option format 63
- Option format 63
- Open the supplied cd rom 64
- Start the projector station for network presentation 64
- Use projector station for network presentation without installing it to the computer 64
- Error code list of projector station for projector station for network presentation 65
- Displaying images or files sent from a tablet pc smartphone 66
- For downloadin 66
- Or detailed method of using the application access the following url http pwpresenter pixelworks com 66
- You can project jpeg images pdf files etc stored in a tablet pc smartphone wirelessly by using a specific application 66
- Playing video and audio using usb connection 67
- Starting usb display 67
- After starting usb display the controller appears on the screen and projection playback starts automatically 68
- For mac 68
- For windows 68
- Playing video and audio 68
- Using the controller 68
- B usb media viewer 69
- Usb media viewer 69
- Using usb media viewer 69
- Option menu 70
- Press the v v b b key on the remote commander to select an image then press the enter key the option menu appears in the lower part of the screen 70
- The image files in the folder are displayed as a thumbnail list 70
- Thumbnail mode 70
- You can select the display order of thumbnails and display method of image files 70
- Display mode 71
- In display mode you can view a selected image in full screen view 71
- In slideshow mode you can view images as a slideshow 71
- Option menu 71
- Press enter key on the remote commander the slideshow pauses and the option menu appears in the lower part of the screen 71
- Press the enter key on the remote commander the option menu appears in the lower part of the screen 71
- Slideshow mode 71
- Option menu 72
- B others 73
- Indicators 73
- Operating status indication 73
- Others 73
- You can check the projector status or abnormality by checking the lighting flashing status of the on standby indicator and warning indicator on the front if the indicators flash in red address the problem in accordance with warning indicators and remedies page 74 73
- If the indicators flash in a manner other than described above unplug the ac power cord and make sure the on standby indicator turns off then plug the ac power cord into the wall outlet and turn on the projector if the problem still persists consult with qualified sony personnel 74
- Warning indicators and remedies 74
- Messages list 75
- When any of the messages listed below appears on the projected image address the problem in accordance with the table below 75
- Before asking to have the projector repaired try to diagnose the problem following the instructions below 76
- Troubleshooting 76
- Vpl sw636c sw631c sw631 sx631 76
- Vpl sw636c only 78
- Loosen the three screws on the lamp 1 then pull out the lamp by its grab 2 80
- Replacing the lamp 80
- Turn off the projector and disconnect the ac power cord from a wall outlet 80
- When the lamp has cooled sufficiently open the lamp cover by loosening 1 screw 80
- For the customers in the u s a and canada lamp contains mercury dispose according to applicable local state province and federal laws for additional information see www sony com mercury 81
- Clean the air filters with a vacuum cleaner 82
- Cleaning the air filter 82
- Open the side cover 82
- Remove the air filter holders 82
- Turn off the projector and disconnect the ac power cord from the ac outlet 82
- Specifications 84
- Hdmi terminal hdmi female 88
- Pin assignment 88
- Rgb input terminal mini d sub 15 pin female 88
- Rs 232c terminal d sub 9 pin male 88
- Usb terminal type a female 89
- Usb terminal type b female 89
- 1 when a signal other than the signals listed in table is input the picture may not be displayed properly an input signal meant for screen resolution different from that of the panel will not be displayed in its original resolution text and lines may be uneven 2 this is identified as a movie delivery signal of 720 60p 3 this is identified as a movie delivery signal of 1080 60p 4 only g with sync y is supported 90
- 1024 64 60 90
- 1050 65 60 90
- 1080 67 60 90
- 1200 75 60 90
- 350 31 70 90
- 400 31 70 90
- 480 31 60 90
- 600 35 56 90
- 624 49 75 90
- 720 45 60 90
- 768 47 60 90
- 768 48 60 90
- 800 49 60 90
- 864 64 70 90
- 900 55 60 90
- 900 61 66 90
- 960 60 60 90
- Acceptable input signal 90
- Analog tv signal 90
- Computer signal 90
- Digital tv signa 90
- Hdmi rgb 90
- Input terminal 90
- Resolution 90
- Resolution fhkhz 90
- Signal fvhz 90
- Video s video 90
- Floor installation 91
- Others 91
- Projection distance and lens shift range 91
- The projection distance is the distance between the center of the projection window and the surface of the projected image the following describes the projection distance and height from the center of the projection window to edge of screen by each projected screen size height h is the height from the bottom of the projected image top for wall mount to a determined by drawing a perpendicular line from the center of the projection window to projected image surface 91
- Horizontal lens shift range left 92
- Horizontal lens shift range right h 92
- L projection distance l h distance between the edge of the image and the center of the projection window 92
- Projection distance and lens shift range 92
- The lens shift range is the distance you can move the lens shift from the center of the projected image 0 when full width and full height of the projected image is regarded as 100 92
- Vertical lens shift range down h 92
- Vertical lens shift range up v 92
- Wall installation 92
- Lens shift range vpl sw636c sw631c sw631 93
- Projection distance formula vpl sw636c sw631c sw631 93
- Projection distance table vpl sw636c sw631c sw631 93
- D projected image size diagonal h distance between the edge of the image and the center of the projection window 94
- Expression 1 unit m inches 94
- Expression 2 94
- Lens shift range vpl sx631 94
- Projection distance formula vpl sx631 94
- Projection distance table vpl sx631 unit m inches 94
- Dimensions 95
- Others 95
- Dimensions 96
- End user license agreement 97
- About trademarks 105
Похожие устройства
- Sony VPL-SW235 Инструкция по эксплуатации
- Sony VPL-SX236 Инструкция по эксплуатации
- Sony VPL-SX226 Инструкция по эксплуатации
- Goldstar GSWH18-DK1DO Руководство по эксплуатации
- Goldstar GSWH24-DK1EO Руководство по эксплуатации
- Goldstar GSWH28-DK1BO Руководство по эксплуатации
- Goldstar GSWH36-DK1AO Руководство по эксплуатации
- Goldstar GSWH42-DK1AO Руководство по эксплуатации
- Goldstar GSWH07-DFM1AI Руководство по эксплуатации
- Goldstar GSWH09-DFM1AI Руководство по эксплуатации
- Goldstar GSWH12-DFM1AI Руководство по эксплуатации
- Goldstar GSWH18-DFM1AI Руководство по эксплуатации
- Goldstar GSKH12-DFM1AI Руководство по эксплуатации
- Goldstar GSKH18-DFM1AI Руководство по эксплуатации
- Goldstar GSKH24-DFM1AI Руководство по эксплуатации
- Goldstar GSTH09-DFM1AI Руководство по эксплуатации
- Goldstar GSTH12-DFM1AI Руководство по эксплуатации
- Goldstar GSTH18-DFM1AI Руководство по эксплуатации
- Goldstar GSTH24-DFM1AI Руководство по эксплуатации
- Goldstar GSFH09-DFM1AI Руководство по эксплуатации