Hotpoint-Ariston CE 6V M3 R/HA [23/48] Care and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston CE 6V M3 R/HA [23/48] Care and maintenance

Hotpoint-Ariston CE 6V M3 R/HA [23/48] Care and maintenance
GB
23
Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the oven
Never use steam cleaners or pressure cleaners on
the appliance.
Clean the glass part of the oven door using a
sponge and a non-abrasive cleaning product,
then dry thoroughly with a soft cloth. Do not use
rough abrasive material or sharp metal scrapers
as these could scratch the surface and cause the
glass to crack.
The stainless steel or enamel-coated external parts
and the rubber seals may be cleaned using a sponge
which has been soaked in lukewarm water and
neutral soap. Use specialised products for the
removal of stubborn stains. After cleaning, rinse and
dry thoroughly. Do not use abrasive powders or
corrosive substances.
The inside of the oven should ideally be cleaned after
each use, while it is still lukewarm. Use hot water and
detergent, then rinse well and dry with a soft cloth. Do
not use abrasive products.
The accessories can be washed like everyday
crockery, and are even dishwasher safe.
Dirt and grease should be removed from the control
panel using a non-abrasive sponge or a soft cloth.
Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents that contain phosphorus.
We recommend that the steel surfaces are rinsed
well then dried thoroughly.
Inspecting the oven seals
Check the door seals around the oven regularly. If the
seals are damaged, please contact your nearest After-
sales Service Centre. We recommend that the oven is
not used until the seals have been replaced.
Replacing the oven light bulb
1. After disconnecting the oven
from the electricity mains,
remove the glass lid covering
the lamp socket (IAA BECKHA).
2. Unscrew the light bulb and
replace it with a similar one:
voltage 230 V, wattage 25 W,
cap E 14.
3. Replace the lid and
reconnect the oven to the electricity supply.
Cleaning the glass ceramic hob
Do not use abrasive or corrosive detergents (for
example, products in spray cans for cleaning barbecues
and ovens), stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces: these
may scratch the surface beyond repair.
It is usually sufficient simply to wash the hob using a
damp sponge and dry it
with absorbent kitchen roll.
If the hob is particularly dirty, rub it with a special
glass ceramic cleaning product, then rinse well and
dry thoroughly.
To remove more stubborn dirt, use a suitable scraper
(this is not supplied with the appliance). Remove
spills as soon as possible, without waiting for the
appliance to
cool, to avoid residues forming crusty
deposits. You can obtain excellent results by using a
rustproof steel wire sponge - specifically designed for
glass ceramic surfaces - soaked in soapy water.
If plastic or sugary substances have accidentally
been melted on the hob, remove them immediately
with the scraper, while the surface is still hot.
Once it is clean, the hob may be treated with a special
protective maintenance product: the invisible film left
by this product protects the surface from drips during
cooking. This maintenance should be carried out
while the appliance is warm (not hot) or cold.
Always remember to rinse the
appliance well with
clean water and dry it thoroughly: residues can
become encrusted during subsequent cooking
processes.
Glass ceramic hob
cleaners
Available from
Window scraper Razor blade
scrapers
DIY Stores
Replacement blades DIY Stores,
supermarkets,
chemists
COLLO luneta
HOB BRITE
Hob Clean
SWISSCLEANER
Boots, Co-op stores,
department stores, Regional
Electricity Company shops,
supermarkets
Assistance
Never use the services of an unauthorised
technician.
Please have the following information to hand:
The type of problem encountered.
The appliance model (Mod.).
The serial number (S/N).
The latter two pieces of information can be found on
the data plate located on the appliance.
Care and maintenance

Содержание

Похожие устройства

Care and maintenance H Hotpoint ARISTON Switching the appliance off Cleaning the glass ceramic hob Disconnect your appliance from the electricity supply before carrying out any work on it Do not use abrasive or corrosive detergents for example products in spray cans for cleaning barbecues and ovens stain removers anti rust products powder detergents or sponges with abrasive surfaces these may scratch the surface beyond repair Cleaning the oven Never use steam cleaners or pressure cleaners on the appliance Clean the glass part of the oven door using a sponge and a non abrasive cleaning product then dry thoroughly with a soft cloth Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack The stainless steel or enamel coated external parts and the rubber seals may be cleaned using a sponge which has been soaked in lukewarm water and neutral soap Use specialised products for the removal of stubborn stains After cleaning rinse and dry thoroughly Do not use abrasive powders or corrosive substances The inside of the oven should ideally be cleaned after each use while it is still lukewarm Use hot water and detergent then rinse well and dry with a soft cloth Do not use abrasive products The accessories can be washed like everyday crockery and are even dishwasher safe Dirt and grease should be removed from the control panel using a non abrasive sponge or a soft cloth Stainless steel can be marked by hard water that has been left on the surface for a long time or by aggressive detergents that contain phosphorus We recommend that the steel surfaces are rinsed well then dried thoroughly Inspecting the oven seals Check the door seals around the oven regularly If the seals are damaged please contact your nearest After sales Service Centre We recommend that the oven is not used until the seals have been replaced Replacing the oven light bulb 1 After disconnecting the oven from the electricity mains remove the glass lid covering the lamp socket see figure 2 Unscrew the light bulb and replace it with a similar one voltage 230 V wattage 25 W cap E 14 3 Replace the lid and reconnect the oven to the electricity supply GB It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll If the hob is particularly dirty rub it with a special glass ceramic cleaning product then rinse well and dry thoroughly To remove more stubborn dirt use a suitable scraper this is not supplied with the appliance Remove spills as soon as possible without waiting for the appliance to cool to avoid residues forming crusty deposits You can obtain excellent results by using a rustproof steel wire sponge specifically designed for glass ceramic surfaces soaked in soapy water If plastic or sugary substances have accidentally been melted on the hob remove them immediately with the scraper while the surface is still hot Once it is clean the hob may be treated with a special protective maintenance product the invisible film left by this product protects the surface from drips during cooking This maintenance should be carried out while the appliance is warm not hot or cold Always remember to rinse the appliance well with clean water and dry it thoroughly residues can become encrusted during subsequent cooking processes Glass ceramic hob cleaners Available from Window scraper Razor blade scrapers DIY Stores Replacement blades DIY Stores supermarkets chemists COLLO luneta HOB BRITE Hob Clean SWISSCLEANER Boots Co op stores department stores Regional Electricity Company shops supermarkets Assistance Never use the services of an unauthorised technician Please have the following information to hand The type of problem encountered The appliance model Mod The serial number S N The latter two pieces of information can be found on the data plate located on the appliance 23

Скачать