Zelmer Piano 13Z014 [76/76] Ecology environment protection

76 GW13-014_v02

TROUBLE SHOOTING

PROBLEM POSSIBLE CAUSE HOW TO FIX, WHAT TO DO

Coffee runs out around the

edge of the lter holder

Filter holder (E) is not inserted in the brew head properly or is not

tightened properly.

Ensure the holder (E) is properly inserted in the brew head unit

and tightened home. See Brewing espresso – p. 71.

There are coffee particles around the lter rim (H).

Clean the rim of the lter (H) and wipe all coffee from the brew

Water tank is not properly installed. Press the tank down to ensure it sits properly.

Knob (K) is set into a different position, e.g. .

Ensure the regulator knob (K) is in position .

Filter on the brew head may be blocked. See Descaling – p. 74.

Coffee lter (H) is blocked. Coffee is ground too nely or tamped

too rmly.

Empty the lter (H) and rinse it under running water. Wipe the brew

head with a cloth.

Coffee lters out in drops

Coffee is ground very nely or tamped too rmly. If you use very nely ground coffee, do not tamp it too rmly.

The appliance is blocked with scale build-up. See Descaling – p. 74.

Espresso does not have

Not enough coffee in the lter (H). See Brewing espresso – p. 71.

Holder loosens during brewing

Coffee is tamped too rmly. Tamp ground coffee less rmly.

Coffee is ground too nely. Change to coarser coffee.

Filter holder (E) does not sit rmly as it has not been tightened rm

enough.

Ensure coffee holder (E) is placed correctly and tightened home in

the brew head.

See Brewing espresso – p. 71.

There are coffee particles around the lter rim (H).

Cups, lters (H) or lter head are cold.

Before brewing, pre-heat cups, lters and holder. See Brewing

espresso – str. 71.

When making cappuccino or latte, milk is not heated enough.

Check if milk is properly heated during frothing. Ensure that milk

does not boil. See Frothing milk –p. 72.

No steam from steam wand Steam wand (C) is blocked. See Maintenance and cleaning – p. 74.

Not enough frothed milk

Milk is not fresh. Check if milk is fresh.

Temperature of milk is too high. Check that milk is properly cooled before use.

Jug.

Uneven distribution or interrupted outow of coffee.

Check if coffee is evenly tamped and check if anything obstructs

the outlets in the head for xing the lter.

Damaged partition in lter holder (E). Contact an authorised service center.

Espresso has burnt taste

Coffee used is unsuitable. Try other coffee brands.

Appliance was not rinsed after descaling.

Before brewing next coffee, rinse the appliance with a tankfull of

water, allow tank to empty completely.

Pump makes too much noise

Appliance is blocked with scale build-up. See Descaling – p. 74.

The manufacturer/importer does not accept any liability for any damages resulting

from unintended use or improper handling.

The manufacturer/importer reserves his rights to modify the product any time in

order to adjust it to law regulations, norms, directives, or due to construction, trade,

aesthetic or other reasons, without notifying in advance.

ECOLOGY – ENVIRONMENT PROTECTION

Each user can protect the natural environment. It is neither

difcult nor expensive.

In order to do it: put the cardboard packing into recycling