Tp-Link T2500-28TC V2 [336/342] Download firmware via bootutil menu

325

Figure 18-2 Open Hyper Terminal

3. Download Firmware via bootUtil menu

To download firmware to the switch via FTP function, you need to enter into the bootUtil menu

of the switch and take the following steps.

1） Connect the console port of the PC to the console port of the switch and open hyper

terminal. Connect FTP server to port 1 of the switch.

2） Power off and restart the switch. When you are prompted that “Press CTRL-B to enter

the bootUtil” in the hyper terminal, please press CTRL-B key to enter into bootUtil

menu shown as Figure 18-3.

Figure 18-3 bootUtil Menu

As the prompt is displayed for a short time, you are suggested not to release the CTRL-B

key until you enter into bootUtil menu after powering on the switch.

3） After entering into bootUtil menu, please firstly configure the IP parameters of the

switch. The format is:

ifconfig ip xxx.xxx.xxx.xxx mask 255.255.255.0 gateway xxx.xxx.xxx.xxx.