Zyxel WRE6602 [39/53] I cannot access the wre6602 or ping any computer from the wlan

Chapter 6 Troubleshooting

WRE6602 User’s Guide

4 If the problem continues, contact the network administrator or vendor, or try one of the advanced

suggestions.

6.4 Resetting the WRE6602 to Its Factory Defaults

If you reset the WRE6602, you lose all of the changes you have made. The WRE6602 re-loads its default

settings. You have to make all of your changes again.

You will lose all of your changes when you reset the WRE6602 to its factory defaults.

To reset the WRE6602,

1 Make sure the power LED is on.

2 Press the Smart Push Button for longer than 10 seconds, the Power LED begins to blink, to set the

WRE6602 back to its factory-default configuration.

If the WRE6602 does not restart automatically, disconnect and reconnect the WRE6602. Then, follow the

directions above again.

6.5 Wireless Problems

I cannot access the WRE6602 or ping any computer from the WLAN.

1 Make sure the wireless LAN is enabled on the WRE6602.

2 Make sure the wireless adapter on the wireless station is working properly.

3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the

same wireless standard as the WRE6602.

4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the

WRE6602.

5 Check that both the WRE6602 and your wireless station are using the same wireless and wireless security

settings, and that both the WRE6602 and the AP are using the same wireless and wireless security

settings.