Thomas VAPORO SMILEY [9/44] Filling up the water boiler when using the device

Filling up the Water Boiler

when using the Device

If there is no more water in the vessel no steam

is emitted when the steam switch (5) is pressed.

The water has to be filled up as follows:

1. Please turn the device off by moving

the on/off switch (1) to “0”.

2. Pull the power plug out of the socket!

3. Wait for approximately 5 minutes and release

the residual pres sure with the steam switch!

4. Open the safety lock (4) slowly while

pressing down at the same time and wait

a few seconds before opening completely

after the overpressure has been relieved.

5. Fill fresh water from the measuring beaker

(9) by means of the fun nel (8) into the boiler.

Do not overfill! Do not exceed the amount

of water indicated on the measuring beaker!

Take care of water splas hes that might come

out of the boiler. In order to prevent the water

from splashing it should be filled into the funnel

slowly after the safety lock has been opened.

6. Fasten the safety lock again.

7. Insert the power plug back into the socket.

Cleaning and Maintenance

• Cleaning and maintenance must only be carried out

when the power plug is removed from the socket.

• Before putting the device away or cleaning it, it

has to be allowed to cool down completely.

• Please clean the device and the accessories

only with a slightly moist cloth.

• Do not use strong cleaning agents

of solvents for cleaning.

• In order to guarantee a long and trouble-free

working life, lime residues have to be rinsed

out of the boiler once a month. Please do not

use vinegar or other anti-liming agents

This device has been tested according to

all relevant current CE guidelines, such as

electromagnetic compatibility and low voltage

directives, and has been constructed in

accordance with the latest safety regulations.

Subject to technical changes without prior notice!