Grillo GH 9 Инструкция по эксплуатации онлайн [13/71] 520666

Translation of the Original Instructions

CLEANING

Thoroughly clean the all purpose flail after each use.

CUTTING POSITIONS

To adjust the cutting height use the lever (fig. 2, n. 10). Turn the lever clockwise to increase the

cutting height, while turn it anti-clockwise to decrease the cutting height. Cutting height can vary

from 30 to 110 mm. In case of uneven grounds set the all purpose flail at the max. cutting height to

avoid damages to the Y-shaped blades. Once the cutting height has been chosen lock the lever

through the appropriate pin (fig. 15).

SLOPES

On steep grounds use the machine upwards/downwards, paying close attention when changing

direction not to hit against obstacles such as stones, branches and roots possibly causing roll-over

of the machine. Always assess each situation with care and pay greater attention on wet grounds

because the machine could slip. Drive slowly downwards and take care not to go over dry or cut

grass to avoid that the wheels loose adherence.

USEFUL TIPS FOR A PROPER USE OF THIS EQUIPEMENT

1) Do not strain the engine. When fume comes out from the exhaust pipe, slow down.

2) Protect the machine from bad weather conditions.

3) Frequently check the blades, turn them the other way round if they're worn and replace them if

necessary. The cutting performance will be better and the engine will not be strained.

4) Check the ground before starting work and remove stones and any other foreign objects.

5) Keep the engine at max. r.p.m. while working and adjust the speed according to the height of

the grass.

6) Keep the engine cooling grids clean (fig. 5, A) as well as the hydraulic engine cooling fins

(fig. 13, B).

7) Frequently check the tyre pressure

IN CASE OF LONG IDLE PERIODS

Should the machine not be used for a long time:

- fully empty the fuel tank.

- thoroughly clean both the engine and the hydrostatic all purpose flail.