Philips HR7766 [14/240] Making sausages



You can use the meat mincer to mince meat and to make sausages.

1 Screw the screw cap onto the motor unit (Fig. 32).

2 Place the gear housing on the motor unit (1) and turn it clockwise to x it (2)

(‘click’) (Fig. 33).

3 Place the cutter housing on the gear housing (1) and turn it anticlockwise to x it

(2) (Fig. 34).

4 Insert the worm shaft into the cutter housing (Fig. 35).

5 Place the cutter unit onto the worm shaft. The cutting edges have to point outwards (Fig. 36).

6 Place the medium grinding disc or coarse grinding disc (depending on the consistency you

prefer) onto the worm shaft (Fig. 37).

Make sure the holes of the grinding disc t around the projections of the cutter housing.

7 Place the screw ring on the cutter housing (1) and turn it clockwise to x it (2) (Fig. 38).

8 Place the tray on the upright part of the cutter housing (Fig. 39).



1 Cut the meat into 10cm-long, 2cm-thick strips.

2 Use lean meat. Remove bones, pieces of gristle and sinews as much as possible.

Never use frozen meat!

3 Select speed 1 to switch on the appliance.

4 Put the meat in the tray. Use the pusher to gently push the meat into the cutter

housing (Fig. 40).

- For steak tartare, mince the meat twice with the medium grinding disc.



1 Mince the meat.

2 Unplug the appliance and remove the screw ring after you have nished mincing.

3 Remove grinding disc and the cutter unit.

Note: Leave the worm shaft in the cutter housing.

4 Place the separator onto the worm shaft (Fig. 41).

5 Place the sausage horn on the cutter housing (1) and screw the screw ring clockwise onto

the cutter housing (2) (Fig. 42).

The appliance is now ready for making sausages.



- Put the sausage skin in lukewarm water for 10 minutes. Then slide the wet skin onto the sausage

horn. Push the (seasoned) minced meat into the cutter housing.

- If the skin gets stuck onto the sausage horn, wet it with some water.



Note: The cleaning table at the front of this booklet gives an overview of how all parts of the appliance

have to be cleaned.

1 Make sure the appliance is switched off and unplugged.

14