Aten RCMDP101U [168/196] Browser

RCM KVM over IP Switch User Manual

152

Note: 1. If the list is empty, or your device doesn’t appear, click

Enumerate to refresh the Device List.

2. If there is more than one device in the list, use the MAC address

to pick the one you want. The RCM KVM over IP Switch's MAC

address is located on its bottom panel.

4. Select either Obtain an IP address automatically (DHCP), or Specify an

IP address. If you chose the latter, fill the IP Address, Subnet Mask, and

Gateway fields with the information appropriate to your network.

5. Click Set IP.

6. After the IP address shows up in the Device List, click Exit.

Browser

1. Set your computer's IP address to 192.168.0.XXX

Where XXX represents any number or numbers except 60. (192.168.0.60 is

the default address of the RCM KVM over IP Switch.)

2. Specify the switch's default IP address (192.168.0.60) in your browser, and

you will be able to connect.

3. Assign a fixed IP address for the RCM KVM over IP Switch that is

suitable for the network segment that it resides on.

4. After you log out, reset your computer's IP address to its original value.