Skil 0780 RA [14/220] Declaration of conformity c
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0780 RA [14/220] Declaration of conformity c

Skil 0780 RA [14/220] Declaration of conformity c
14
★ Tool does not operate
- kickback brake is activated -> pull hand guard S 2
back in position $a
- no power supply -> check power supply (power cable,
circuit breakers, fuses)
- plug not connected -> connect plug
- extension cord damaged -> replace extension cord
★ Tool operates intermittently
- on/o switch defective -> contact dealer/service
station
- internal wiring defective -> contact dealer/service
station
- extension cord damaged -> replace extension cord
★ Dry chain
- no oil in reservoir -> rell oil
- vent in oil reservoir cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
★ Brake does not stop chain
- kickback brake/run-down brake defective -> contact
dealer/service station
★ Chain/chain bar overheats
- no oil in reservoir -> rell oil
- vent in oil reservoir cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
- chain is overtensioned -> adjust chain tension
- dull chain -> sharpen chain or replace
★ Tool vibrates abnormally
- chain tension too loose -> adjust chain tension
- dull chain -> sharpen chain or replace
- chain worn out -> replace chain
- chain teeth are facing in the wrong direction ->
reassemble with chain in correct direction
ENVIRONmENT
• Donotdisposeofelectrictools,accessoriesand
packagingtogetherwithhouseholdwastematerial
(only for EU countries)
- in observance of European Directive 2012/19/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 8 will remind you of this when the need for
disposing occurs
DEClARATION OF CONFORmITY
• We declare under our sole responsibility that the product
described under “Technical data” is in conformity with the
following standards or standardization documents: EN
60745, EN 61000, EN 55014, in accordance with the
provisions of the directives 2004/108/EC, 2006/42/EC,
2000/14/EC, 2011/65/EU
• Technicalfileat: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
¹ÊÁÂÆιÆ¼½ÊÇǾ¼½Æ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
Ĺ¾ÁÂÿʹ¹¾
ÈÈÊÇιÄ¹Æ¹¿½Ê
19.12.2013
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 87 dB(A) and the sound
power level 107 dB(A) (standard deviation: 3 dB), and the
vibration 4.7 m/s² (hand-arm method; uncertainty K = 1.5
m/s²)
• Measured in accordance with 2000/14/EC (EN/ISO
3744) the guaranteed sound power level LWA is lower
than 110 dB(A) (conformity assessment procedure
according to Annex V)
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745; it
may be used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protectyourselfagainsttheeffectsofvibration
bymaintainingthetoolanditsaccessories,
keepingyourhandswarm,andorganizingyour
workpatterns
Tronçonneuseàchaîne 0780
INTRODUCTION
• L’outil électrique est conçu pour scier le bois, comme par
ex. les poutres en bois, les planches, les branches, les
tronçons ainsi que pour abattre des arbres; il peut être
utilisé pour des coupes dans et contre le sens des bres
du bois
• Cet outil n’est conçu pour un usage professionnel
• Vériez que le conditionnement contient toutes les
pièces présentées dans le schéma 2
• Lorsque des pièces manquent ou sont endommagées,
veuillez contacter votre distributeur
• Lisezattentivementcemanueld’instructionavant
d’utiliserl’outiletconservez-lepourpouvoirvousy
référerultérieurement3
• Prêtezattentionauxconsignesdesécuritéetaux
avertissements;nepassuivrecesinstructionspeut
entraînerdesgravesblessures

Содержание

Похожие устройства

Tool does not operate kickback brake is activated pull hand guard S back in position a no power supply check power supply power cable circuit breakers fuses plug not connected connect plug extension cord damaged replace extension cord Tool operates intermittently on off switch defective contact dealer service station internal wiring defective contactdealer service station extension cord damaged replace extension cord Dry chain no oil in reservoir refill oil vent in oil reservoir cap clogged clean cap oil passage clogged clean oil passage outlet Brake does not stop chain kickback brake run down brake defective contact dealer service station Chain chain bar overheats no oil in reservoir refill oil vent in oil reservoir cap clogged clean cap oil passage clogged clean oil passage outlet chain is overtensioned adjust chain tension dull chain sharpen chain or replace Tool vibrates abnormally chain tension too loose adjust chain tension dull chain sharpen chain or replace chain worn out replace chain chai n teeth are faci ng i n the wrong direction reassemble with chain in correct direction Technical file at SKIL Europe BV PT SEU ENG1 4825 BD Breda NL Marijn van der Hoofden Operations Engineering Olaf Dijkgraaf Approval Manager SKIL Europe BV 4825 BD Breda NL 19 12 2013 NOISE VIBRATION Measured in accordance with EN 60745 the sound pressure level of this tool is 87 dB A and the sound power level 107 dB A standard deviation 3 dB and the vibration 4 7 m s2 hand arm method uncertainty К 1 5 m s2 Measured in accordance with 2000 14 EC EN ISO 3744 the guaranteed sound power level LWA is lower than 110 dB A conformity assessment procedure according to Annex V The vibration emission level has been measured in accordance with a standardised test given in EN 60745 it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned using the tool for different applications or with different or poorly maintained accessories may significantly increase the exposure level the times when the tool is switched off or when it is running but not actually doing the job may significantly reduce the exposure level I protect yourself against the effects of vibration by maintaining the tool and Its accessories keeping your hands warm and organizing your work patterns ENVIRONMENT Do not dispose of electric tools accessories and packaging together with household waste material only for EU countries in observance of European Directive 2012 19 EC on waste of electric and electronic equipment and its implementation in accordance with national law electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility symbol will remind you of this when the need for disposing occurs Tronçonneuse à chaîne 0780 INTRODUCTION Loutil électrique est conçu pour scier le bois comme par ex les poutres en bois les planches les branches les tronçons ainsi que pour abattre des arbres il peut être utilisé pour des coupes dans et contre le sens des fibres du bois Cet outil n est conçu pour un usage professionnel Vérifiez que le conditionnement contient toutes les pièces présentées dans le schéma Lorsque des pièces manquent ou sont endommagées veuillez contacter votre distributeur Lisez attentivement ce manuel d Instruction avant d utiliser l outil et conservez le pour pouvoir vous y référer ultérieurement Prêtez attention aux consignes de sécurité et aux avertissements ne pas suivre ces Instructions peut entraîner des graves blessures DECLARATION OF CONFORMITY C We declare under our sole responsibility that the product described under Technical data is in conformity with the following standards or standardization documents EN 60745 EN 61000 EN 55014 in accordance with the provisions of the directives 2004 108 EC 2006 42 EC 2000 14 EC 2011 65 EU 14

Скачать