Skil 0700 RA [6/100] Introduction
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0700 RA [6/100] Introduction

Skil 0700 RA [6/100] Introduction
6

Weed brush 0700
INTRODUCTION
• This tool has been designed for removing weed from
terraces and between tiles
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Readthisinstructionmanualcarefullybeforeuse
andsaveitforfuturereference3
• Payspecialattentiontothesafetyinstructionsand
warnings;failuretofollowthesemayresultin
seriousinjury
TECHNICAl DATA 1
TOOl ElEmENTS 2
A Cutting guard
B Wheel
C Spindle-lock button
D Collet nut
E Wrench
F Brush
G Brush indicator
H Locking sleeve
J Telescopic tube
k Handle
l Cord restraint
m Trigger switch
N Ventilation slots
P Storage rail (screwsnotsupplied)
SAFETY
SPECIFICSAFETYINSTRUCTIONSFORWEED
BRUSHES
GENERAl
• Be familiar with the controls and the proper use of the tool
• The user is responsible for accidents or hazards
occurring to other people or their property
• Only use the tool when the ambient temperature is
between 0°C and 40°C
• Never mount metal cutting elements onto this tool
• Do not use the tool for removing wet weed
PERSONALSAFETY
• This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the tool by a person responsible for their safety
• Ensure that children do not play with the tool
• Never allow children or people who are not familiar with
the operating instructions to use the tool
• Always wear eye protection, long trousers and sturdy
shoes when operating the tool
• Never operate the tool with a damaged cutting guard or
without the cutting guard mounted
• Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
• Never operate the tool when you are tired, sick or under
the inuence of drugs, alcohol or medication
ElECTRICAl SAFETY
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool (tools with
a rating of 230V or 240V can also be connected to a
220V supply)
• Inspect the cord periodically and have it replaced by a
qualied person, if damaged
• Inspect the extension cord periodically and replace it, if
damaged (inadequateextensioncordscanbe
dangerous)
• Only use an extension cord which is intended for outdoor use
and equipped with a watertight plug and coupling-socket
• Use completely unrolled and safe extension cords with a
capacity of 16 Amps (U.K. 13 Amps)
• When operating the tool use a residual current device
(RCD) with a triggering current of 30 mA maximum
• Do not run over, crush or pull the (extension) cord
• Protect the (extension) cord from heat, oil and sharp
edges
• Keep the (extension) cord away from the rotating brush
• Always switch o tool and disconnect plug from power
source if the power supply cord or the extension cord is
cut, damaged or entangled (donottouchthecord
beforedisconnectingtheplug)
BRUSHES
• SKIL can assure awless functioning of the tool only
when original accessories are used
• Only mount brushes of which the maximum speed
(“RPM”) is higher than the rotations per minute marked
on the tool
• Only use brushes with a maximum diameter of 100 mm
• Do not use worn brushes
• Rust stains or other signs of chemical or mechanical
changes of the material that hold the brush threads may
cause premature brush disfunctioning
• Store brushes in a suitable place in such a way that they
are protected against the following inuences:
- high atmospheric humidity, heat, water or other uids
which could damage the brush
- acids or acid vapours, which could damage the brush
- low ambient temperatures causing condensation on
the brush when stored in an area with higher ambient
temperatures
- deformation of whatever part of the brush
BEFORE USE
• Only use the tool in daylight or with appropriate articial
lighting
• Check the functioning of the tool before each use and
after any impact; in case of a defect, have it repaired
immediately by a qualied person (never open the tool
yourself)
• Remove any adjusting key or wrench before turning the
power tool on (awrenchorakeyleftattachedtoa
rotatingpartofthepowertoolmayresultin
personalinjury)

Содержание

Похожие устройства

Weed brush Never operate the tool with a damaged cutting guard or without the cutting guard mounted Never operate the tool in the direct vicinity of persons stop using the tool when persons especially children or pets are nearby Never operate the tool when you are tired sick or under the influence of drugs alcohol or medication 0700 INTRODUCTION This tool has been designed for removing weed from terraces and between tiles This tool is not intended for professional use Check whether the packaging contains all parts as illustrated in drawing z When parts are missing or damaged please contact your dealer ELECTRICAL SAFETY Always check that the supply vol tage I s the sam e as the voltage indicated on the nameplate of the tool tools with a rating of 230V or 240V can also be connected to a 220V supply Inspect the cord periodically and have it replaced by a qualified person if damaged Inspect the extension cord periodically and replace it if damaged Inadequate extension cords can be Read this Instruction manual carefully before use and save It for future reference Pay special attention to the safety Instructions and warnings fallure to follow these may result In serious Injury dangerous Only use an extension cord which is intended for outdoor use and equipped with a watertight plug and coupling socket Use completely unrolled and safe extension cords with a capacity of 16 Amps U K 13 Amps When operating the tool use a residual current device RCD with a triggering current of 30 mA maximum Do not run over crush or pull the extension cord Protect the extension cord from heat oil and sharp edges Keep the extension cord away from the rotating brush Always switch off tool and disconnect plug from power source if the power supply cord or the extension cord is cut damaged or entangled do not touch the cord TECHNICAL DATA TOOL ELEMENTS A Cutting guard B Wheel C Spindle lock button D Collet nut E Wrench F Brush G Brush indicator H Locking sleeve J Telescopic tube K Handle L Cord restraint M Trigger switch N Ventilation slots P Storage rail screws not supplied before disconnecting the plug BRUSHES SKI L can assure fl awless functionin g of the tool only when original accessories are used Only mount brushes of which the maximum speed RPM is higher than the rotations per minute marked on the tool Only use brushes with a maximum diameter of 100 mm Do not use worn brushes Rust stains or other signs of chemical or mechanical changes of the material that hold the brush threads may cause premature brush disfunctioning Store brushes in a suitable place I n such a way that they are protected against the following influences high atmospheric humidity heat water or other fluids which could damage the brush acids or acid vapours which could damage the brush low ambient temperatures causing condensation on the brush when stored in an area with higher ambient temperatures deformation of whatever part of the brush SAFETY SPECIFIC SAFETY INSTRUCTIONS FOR WEED BRUSHES GENERAL Be familiar with the controls and the proper use of the tool The user is responsible for accidents or hazards occurring to other people or their property Only use the tool when the ambient temperature is between O C and40 C Never mount metal cutting elements onto this tool Do not use the tool for removing wet weed PERSONAL SAFETY BEFORE USE This tool is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the tool by a person responsible for their safety Ensure that children do not play with the tool Never allow children or people who are notfamiliar with the operating instructions to use the tool Always wear eye protection long trousers and sturdy shoes when operating the tool Only use the tool in daylight or with appropriate artificial lighting Check the functioning of the tool before each use and after any impact in case of a defect have it repaired immediately by a qualified person never open the tool yourself Remove any adjusting key or wrench before turning the power tool on a wrench or a key left attached to a rotating part of the power tool may result In personal injury 6

Скачать