Skil 0700 RA [7/100] Application advice
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 0700 RA [7/100] Application advice

Skil 0700 RA [7/100] Application advice
7
• Before use, thoroughly inspect the cutting area and
remove any object that the tool may sling during cutting
(such as stones, loose pieces of wood, etc.)
DURING USE
• Only use the tool in an vertical position, with the brush
pointing to the ground (neverswitchonthetoolin
anotherposition)
• Operate the tool at a walking pace only (do not run)
• Do not cross roads or gravel paths with the tool still
running
• Do not get distracted and always concentrate on what
you are doing
• Always ensure that the ventilation openings are kept clear
of debris
AFTER USE
• The brush continues to rotate for a short time after the
tool is switched o (donottouchtherotatingbrush)
• Always disconnect plug from power source
- whenever leaving the tool unattended
- before clearing jammed material
- before checking, cleaning or working on the tool
- after striking a foreign object
- whenever the tool starts vibrating abnormally
• Before you put down the tool, switch o the motor and
ensure that all moving parts have come to a complete
standstill
• Store the tool indoors in a dry and locked-up place, out
of reach of children
EXPLANATIONOFSYMBOLSONTOOL
3Warning! Read the instruction manual
4 Do not expose tool to rain
5 Wear protective glasses and hearing protection
6 Payattentiontotheriskofinjurycausedbyflying
debris (keep bystanders a safe distance away from work
area)
7 Always keep hands and feet away from rotating parts
8 Switch o and disconnect plug before cleaning/
maintenance or if (extension) cord is damaged or
entangled
9 Double insulation (no earth wire required)
0 Do not dispose of the tool together with household waste
material
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• If for any reason the old plug is cut o the cord of this tool,
it must be disposed of safely and not left unattended
• Do not connect the blue (= neutral) or brown (= live) wire
in the cord of this tool to the earth terminal of the plug
USE
• Assembly instructions
! alwaysdisconnecttheplugbeforemounting/
removingthebrush
- slide guard A over motor housing as illustrated until it
clicks into place !
- mount wheel B onto motor housing as illustrated until it
clicks into place @
- push spindle-lock button C and hold it while you
loosen collet nut D with wrench E #
- mount brush F with its centre in line with brush
indicator G
- tighten collet nut D with wrench E while pushing
spindle-lock button C
! replacethebrushwhenitisworn(SKIL
accessorynumber2610Z02973)
• Height adjustment $
- loosen locking sleeve H by turning it clockwise
! whenusingtoolforthefirsttime,rotatehandleK
90°afterlooseninglockingsleeveH
- extend tube J to the desired height
- tighten locking sleeve H by turning it counter-clockwise
! donotforcethetoolwhenextending/retracting
thetubetodesiredheight
• Cord restraint %
- hook the loop in the extension cord over restraint L as
illustrated
- pull tight to secure the extension cord
• On/o ^
- switch on tool by pressing trigger switch M
- switch o tool by releasing trigger switch M
! afterswitchingoffthetoolthebrushcontinuesto
rotateforafewseconds
- allow the brush to stop rotating before switching on
again
! donotrapidlyswitchonandoff
• Before using the tool
- ensure that brush F # is correctly mounted and that
collet nut D # is rmly tightened
- test-run tool for at least 30 seconds at highest no-load
speed in a safe position
- stop immediately in case of considerable vibration or
other defects and check tool to determine the cause
• Removing weed
! ensurethatthecuttingareaisfreeofstones,
debrisandotherforeignobjects
- ensure that the bottom side of the tool is kept in a level
position
- start working only when motor is running
- start working near the mains socket and move away
while working
- keep the tool away from solid objects and plants
- do not use the tool in one spot too long
- do not overload the tool
• Holding and guiding the tool &
- hold the tool rmly with one hand
- guide the tool at a constant speed over the surface to
be worked on
- maintain a stable working position
- always hold the tool well away from your body
APPLICATIONADVICE
• For best results test-run the tool on a small part of the
surface and check if the tiles do not get damaged
• Regular weeding helps to avoid persistent weed
• For more tips see www.skil.com
MAINTENANCE/SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean
! disconnecttheplugbeforecleaning
- regularly clean ventilation slots N 2 with a soft cloth
- regularly remove dirt from cutting guard A 2 with a
soft brush

Содержание

Похожие устройства

replace the brush when it Is worn SKIL accessory number 2610Z02973 Before use thoroughly inspect the cutting area and remove any object that the tool may sling during cutting such as stones loose pieces of wood etc Height adjustment loosen locking sleeve H by turning it clockwise DURING USE I when using tool for the first time rotate handle K 90 after loosening locking sleeve H Only use the tool in an vertical position with the brush pointing to the ground never switch on the tool In another position extend tube J to the desired height ti ghten I ocki ng sleeve H by turning it counter dockwise Operate the tool at a walking pace only do not run Do not cross roads or gravel paths with the tool still running Do not get distracted and always concentrate on what you are doing Always ensure that the ventilation openings are kept clear of debris I do not force the tool when extending retracting the tube to desired height Cord restraint hook the loop in the extension cord over restraint L as illustrated pull tight to secure the extension cord On off switch on tool by pressing trigger switch M switch off tool by releasing trigger switch M AFTER USE The brush continues to rotate for a short time after the tool is switched off do not touch the rotating brush Always disconnect plug from power source whenever leaving the tool unattended before clearing jammed material before checking cleaning or working on the tool after striking a foreign object whenever the tool starts vibrating abnormally Before you put down the tool switch off the motor and ensure that all moving parts have come to a complete standstill Store the tool Indoors in a dry and locked up place out of reach of children after switching off the tool the brush continues to rotate for a few seconds allow the brush to stop rotating before switching on again I do not rapidly switch on and off Before using the tool ensure that brush F is correctly mounted and that collet nut D is firmly tightened test run tool for at least 30 seconds at highest no load speed in a safe position stop immediately in case of considerable vibration or other defects and check tool to determine the cause Removing weed EXPLANATION OF SYMBOLS ON TOOL Warning Read the instruction manual ensure that the cutting area Is free of stones debris and other foreign objects Do not expose tool to rain Wear protective glasses and hearing protection Pay attention to the risk of Injury caused by flying debris keep bystanders a safe distance away from work ensure that the bottom side of the tool is kept in a level position start working only when motor is running start working near the mains socket and mwe away while working keep the tool away from solid objects and plants do not use the tool in one spot too long do not overload the tool Hol ding and guidi ng the tool hold the tool firmly with one hand guide the tool at a constant speed over the surface to be worked on maintain a stable working position always hold the tool well away from your body area 71 Always keep hands and feet away from rotating parts Switch off and disconnect plug before cleaning maintenance or if extension cord is damaged or entangled Double insulation no earth wire required Do not dispose of the tool together with household waste material WHEN CONNECTING NEW 3 PIN PLUG U K ONLY If for any reason the old plug is cut off the cord of this tool it must be disposed of safely and not left unattended Do not connect the blue neutral or brown live wire in the cord of this tool to the earth terminal of the plug APPLICATION ADVICE USE For best results test run the tool on a small part of the surface and check if the tiles do not get damaged Regular weeding helps to avoid persistent weed For more tips see www skil com Assembly instructions I always disconnect the plug before mounting removing the brush slide guard A over motor housing as illustrated until it clicks into place mount wheel B onto motor housing as illustrated until it clicks into place push spindle lock button C and hold it while you loosen collet nut D with wrench E mount brush F with its centre in line with brush indicator G tighten collet nut D with wrench E while pushing spindle lock button C MAINTENANCE SERVICE This tool is not intended for professional use Always keep tool and cord clean I disconnect the plug before cleaning regularly clean ventilation slots N with a soft cloth regularly remove dirt from cutting guard A with a soft brush 7

Скачать