Pilotage Simplex-4 Competition RC12495 [20/70] Charging li pol li fe batteries

M01 LP CHG 4.20V 3S

1800mAH 1.8A BLC-ON

M01 LF CHG 3.60V 3S

1800mAH 1.8A BLC-ON

CHARGING LIPOL/LIFE BATTERIES

IMPORTANT Li-Pol Charging Safety Notes:

• Never leave batteries to charge unattended

• Charge Li-Pol/Li-Fe batteries in a reproof location

It is absolutely essential to select the correct battery type.

ATTENTION: CHARGING BATTERIES WITH THE INCORRECT CHARGE SETTING IS A FIRE HAZARD. BE SURE TO CHECK THE BATTERY TYPE

PRIOR TO PROCEEDING.

While in the main screen, keep pressing “Enter” button until the battery type is ashing. Keep pressing the “Battery Type” button until

LP (Li-Pol) or LF (Li-Fe) is selected. A Li-Pol battery is used in this manual as the detailed example.

Charging a Li-Pol/Li-Fe Battery Pack

** Very Important: Be sure that the cell count is correct. **

ATTENTION: Do not set the charge current above 1C unless the pack’s technical documentation explicitly states that it can be

charged at higher C rates. Doing so may damage your battery pack and act as a re hazard. For example, if the battery pack

has a capacity of 2100mAh, then under no circumstances should you set the charge current above 2.1A unless otherwise

noted.

When you choose Li-Pol or Li-Fe battery type, the charger will enter into Li-Pol or Li-Fe charging mode.