Pilotage Simplex-4 Competition RC12495 [30/70] M01 nimh charge 8c 3600mah c 3 a d 5mv

Delta Peak Voltage (DeltaV) Settings

Please refer to Technical Glossary section for the technical meaning of DeltaV. Usually NiCd batteries require a higher value (8mV-

20mV) and NiMH batteries require a lower value (1mV-10mV). It is recommended to use the lowest value that allows the battery pack

to fully charge without false peaking (premature delta-peak cuto). This setting is greatly inuenced by the quality of the battery, its

age and its wear level.

While charging NiMH/NiCd batteries, the charging process might be interrupted before the battery is fully charged (battery should be

slightly warm to the touch if it is fully charged). If this is the case you may restart the charge process again or try using a higher delta-

peak value.

Then press the “Enter” button until the charge current ashes. Use “–“ or “+” to select the

desired current. The maximum charge current is decided by your selected battery cells.

ATTENTION: Please consult the NiCd/NiMH charge rate chart at the end of this section to

determine optimal current settings to ensure long and safe battery life.

Press the “Enter” button until the Delta-Peak Voltage (DeltaV) vaule ashes. The default value

of DeltaV is 8mV for NiMH and NiCd batteries. Please consult the DeltaV setting section

below to change the DeltaV value.

M01 NiMH CHARGE 8C

3600mAH C=3.6A D=5mV

M01 NiMH CHARGE 8C

3600mAH C=3.6A D=6mV