Pilotage Simplex-4 Competition RC12495 [33/70] Www pilotage rc com

Pilotage Simplex-4 Competition RC12495 [33/70] Www pilotage rc com
www.pilotage-rc.com
31
BATTERY CHECK
PLEASE WAIT...
Press the “Enter” button to set the discharge current and use “–“ or “+” to select a desired
value. The maximum discharge current is related to the battery cell count that was set in the
charge screen.
Press and hold the “Enter” button until the discharge process starts.
Press the “Enter” button to set the nominal cuto voltage for the entire battery pack (not
individual cells) and use the “–“ or “+” buttons to set the desired value. The charger has a
factory default setting at 0.9V per cell. For example, if you select 8 cells in the charge screen,
the default cuto voltage will be set at 7.2V (0.9x8). The limit is 0.7V for the whole pack. Note:
Discharging the battery pack to a too low voltage will damage the battery. Only modify this
setting if you are an experienced user.
Discharging a NiMH/NiCd Battery Pack
While in the main screen and no text is ashing, keep pressing the “+” or “-“ until the NiMH/NiCd discharge screen is displayed. Before
you start to set up the parameters of discharge, you have to choose battery cell count and battery capacity in the charging screen as
outlined in previous section.
M01 NiMH DISCHARGE
D = 2.0A Vb = 7.2V
M01 NiMH DISCHARGE
D = 2.0A Vb = 7.2V

Содержание

Похожие устройства

Скачать