![AMERICAN DJ Focus Spot TWO [2/18] Warning](/img/pdf.png)
AMERICAN DJ Focus Spot TWO [2/18] Warning
![AMERICAN DJ Focus Spot TWO [2/18] Warning](/views2/2008201/page2/bg2.png)
ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 3ADJ Products, LLC - www.adj.com - Focus Spot Two Instruction Manual Page 2
• DMX-512 Protocol Compatible (2 DMX Channel Modes: 16 Chan-
nels & 18 Channels)
• 3 Operating Modes - Sound Active, Show Mode, & DMX Control
• 5 Dimmer Curves (Standard, Stage, TV, Architectural, & Theatre)
• Internal Microphone
• Digital Display for Address and Function Setting
• 4 Preprogrammed Shows
• UC IR and Airstream IR Compatiable (Not Included)
Focus Spot Two Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modication to this unit.
Focus Spot Two Handling Precautions
Focus Spot Two Warranty Registration
The Focus Spot Two carries a 2 year (730 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www. adj-
products.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact ADJ Products, LLC
customer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Focus Spot Two General Instructions Focus Spot Two General Information
Unpacking: Thank you for purchasing the Focus Spot Two by ADJ
Products, LLC. Every Focus Spot Two has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your xture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support rst.
Introduction: The Focus Spot Two is a DMX intelligent, LED moving
head fixture. The Focus Spot Two can operate as a stand alone fixture
or in a Master/Slave set up. The Focus Spot Two has three operating
modes; a sound active, show mode, DMX controlled. This fixture is
suitable for theaters, studios, retail stores, and other similar locations.
For best results use fog or special effects smoke to enhance the beams
projections.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Содержание
- User instructions p.1
- Focus spot two p.1
- Unpacking p.2
- Introduction p.2
- Customer support p.2
- Caution p.2
- Warning p.2
- Suspender screew p.4
- Mm 9 3 p.4
- Mm 6 1 p.4
- Mm 15 5 p.4
- Power supply p.5
- Dmx 512 p.5
- Pin 4 do not use p.6
- Notice p.6
- Not used p.6
- Ground shield p.6
- Focus spot two dmx set up p.6
- Data true signal p.6
- Data compliment signal p.6
- Conductor 5 pin xlr male in 3 pin xlr female out p.6
- Be sure to follow figures two and three when making your own cables do not use the ground lug on the xlr connector do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr s outer casing grounding the shield could cause a short circuit and erratic behavior p.6
- Your cables should be made with a male and female xlr connector on either end of the cable also remember that dmx cable must be daisy chained and cannot be split p.6
- When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior a terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male xlr connector data and data this unit is inserted in the female xlr connector of the last unit in your daisy chain to terminate the line using a cable terminator adj part number z dmx t will decrease the possibilities of erratic behavior p.6
- Special note line termination p.6
- Some manufactures use 5 pin dmx 512 data cables for data transmission in place of 3 pin 5 pin dmx fixtures may be implemented in a 3 pin dmx line when inserting stan dard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores the chart below details a proper cable conversion p.6
- Pin xlr to 5 pin xlr conversion p.6
- Pin xlr dmx connectors p.6
- Pin 5 do not use p.6
- Focus spot two 16 channel mode p.7
- Channel value function p.7
- Focus spot two 18 channel mode p.8
- Focus spot two 16 channel mode p.8
- Channel value function p.8
- Focus spot two 18 channel mode p.9
- Channel value function p.9
- Dmx addres p.10
- Channel mod p.10
- This will let you set unit as a master or slave in a master slave configuration p.10
- This will let you select your desired dmx channel mode p.10
- System menu when making adjustments press enter to confirm your setup then press and hold the menu button for at least 3 seconds to exit without making any adjust ments press the menu button the display will lock after 30 seconds press the menu button for 3 seconds to unlock p.10
- Slave mode p.10
- Set the dmx address p.10
- This mode can be used as a precaution mode that in case the dmx signal is lost the operating mode chosen in the setup is the running mode the fixture will go into when the dmx signal is lost you can also set this as the operating mode you would like the unit to return to when power is applied p.11
- Sound sens p.11
- Sound mod p.11
- Show modes 0 4 factory programs show mode can run with or without sound active mode active p.11
- Show mod p.11
- In this mode you can select the dimmer curve p.11
- In this mode you can adjust the sound sensitivity of the sound active mode p.11
- In this mode the unit will run in sound active mode p.11
- Dmx stat p.11
- Dimmer curv p.11
- With this function you can make the back light automatically turn off after one minute p.12
- Auto tes p.12
- With this function you can display the running time of the unit p.12
- With this function you can display the run ning temperature of the unit p.12
- Use this function to reset the motors p.12
- Tilt inversion p.12
- Tilt inver p.12
- This will display the firmware soft ware version p.12
- This function will run a self test program p.12
- Restore the factory settings p.12
- Pro defaul p.12
- Pan inversion p.12
- Pan inver p.12
- Led temp p.12
- Fixture tim p.12
- Firmware versio p.12
- Back ligh p.12
- Tilt offse p.13
- Setting adjustment for the rotating gobo motor p.13
- Setting adjustment for the prism p.13
- Setting adjustment for the gobo wheel p.13
- Setting adjustment for the focus p.13
- Setting adjustment for the color wheel p.13
- Rgobo offse p.13
- Prism offse p.13
- Pan offse p.13
- Gobo offse p.13
- Focus offse p.13
- Color offse p.13
- Adjustment of the tilt home position p.13
- Adjustment of the pan home position p.13
- Show mode p.14
- Master slave operation p.14
- Universal dmx control p.14
- Sound active mode p.14
- To remove the gobo holder gently pull the gobo holder to wards the front of the unit and slide it up and out p.15
- To change a gobo rotate the moving head so that the uv lens is located on top unscrew the single middle screw see instruction number 1 on the next page p.15
- The gobo s in this unit are interchangable please be very care ful when replacing the gobo caution never open the unit when in use always disconnect the main power before attempting to change the gobos p.15
- Reassemble the unit p.15
- Once you loosen the single screw you are able to swing the head back see instruction number 2 on the next page you will now be able to access the gobo wheel turn the wheel with your hand until you come across the gobo you would like to change p.15
- Gently and carefully remove the retainer ring after the re tainer ring is removed carefully remove the gobo 5 change the gobo and replace the retainer ring carefully slide the gobo holder back into the housing slot p.15
- Unscrew the single screw 2 flip the top cover back p.16
- Remove the lens 4 unscrew the 4 screws located on the other side p.16
- Focus spot two removing the head casing p.16
- Focus spot two photometric chart p.16
- Focus spot two dimmer curve chart p.16
- Due to fog residue smoke and dust cleaning the internal and exter nal optical lenses and mirror should be carried out periodically to optimize light output cleaning frequency depends on the environ ment in which the fixture operates i e smoke fog residue dust dew in heavy club use we recommend cleaning on a monthly basis periodic cleaning will ensure longevity and crisp output 1 use normal glass cleaner and a soft cloth to wipe down the out side casing 2 use a brush to wipe down the cooling vents and fan grill 3 clean the external optics with glass cleaner and a soft cloth every 20 days 4 clean the internal optics with glass cleaner and a soft cloth every 30 60 days 5 always be sure to dry all parts completely before plugging the unit back in p.17
- Be sure the external fuse has not blown the fuse is located on the rear panel of the unit 2 be sure the fuse holder is completely and properly seated unit does not respond to sound p.17
- Adj products llc www adj com focus spot two instruction manual page 32 adj products llc www adj com focus spot two instruction manual page 33 p.17
- Trouble shooting listed below are a few common problems that you may encounter with solutions p.17
- No light output from the unit p.17
- Low frequencies bass should cause the unit to react to sound tapping on the microphone quiet or high pitched sounds may not activate the unit p.17
- Locate and remove the unit s powercon cord once the cord has been removed the fuse holder is located under the power socket use a phil ips head screw driver unscrew the fuse holder remove the bad fuse and replace with a new one p.17
- Focus spot two warranty p.17
- Focus spot two trouble shooting p.17
- Focus spot two fuse replacement p.17
- Focus spot two cleaning p.17
- This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source adj products llc 6122 s eastern ave los angeles ca 90040 usa tel 323 582 2650 fax 323 725 6100 web www adj com e mail info americandj com p.18
- Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice p.18
- Please note p.18
- Model focus spot two p.18
- Auto sensing voltage p.18
- A d j supply europe b v junostraat 2 6468 ew kerkrade the netherlands service adjgroup eu www adj eu tel 31 45 546 85 00 fax 31 45 546 85 99 p.18
Похожие устройства
-
AMERICAN DJ Vizi BSW300Руководство по эксплуатации -
AMERICAN DJ Inno Pocket Spot LZRРуководство по эксплуатации -
AMERICAN DJ Inno Color Beam Z19Руководство по эксплуатации -
AMERICAN DJ Vizi Beam RXONEРуководство по эксплуатации -
AMERICAN DJ Vizi Hybrid 16RXРуководство по эксплуатации -
AMERICAN DJ Dotz TPAR SystemРуководство по эксплуатации -
ADJ Hydro Beam X1Руководство по эксплуатации -
Involight LDF100Руководство по эксплуатации -
AMERICAN DJ Focus Spot ONEРуководство по эксплуатации -
Involight LED PAR984WРуководство по эксплуатации -
Antari M-7Руководство по эксплуатации -
STAGG SLI KINGPAR22Руководство по эксплуатации