Vitek VT-8701 [23/64] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8701 [23/64] English

Vitek VT-8701 [23/64] English
23
ENGLISH
volume of hot water. Press the button «+» or «-» to
increase or decrease the volume of hot water, to
confirm and return to the settings menu, press the
button «Menu» « », to return to the previous
interface, press the button «ОК» « ».
D. After completing the Espresso or Americano
setup, press the button «Menu» « » to pro-
ceed to the next step, or continuously press the
button 7 times to return to the standby mode.
2. Setting of the temperature
After returning to the settings menu (Fig. 15),
press the button «Menu» « », and go to the
temperature control interface (Fig. 17). Press the
button «+» or «-» to increase or decrease the cof-
fee temperature.
To confirm, click the button «Menu» « » and
proceed to the next step.
3. Setting the automatic switch-off time
After returning to the settings menu (Fig. 15),
press the button «Menu» « » 2 times, and go
to the switch-off time setting interface (Fig. 18).
Press the button «+» or «-» to select the automatic
switch-off time, it can be set to 0.5 hours, 1 hour,
2 hours... 24 hours. To confirm, click the button
«Menu» « » and proceed to the next step.
4. Return to the factory settings
After returning to the settings menu (Fig. 15),
press the button «Menu» « » 3 times, and go
to the factory settings reset interface (Fig. 19). To
confirm, press the button «ОК» « », and the
countdown will start to appear on the display of the
control panel (7).
After the countdown is completed, you will hear
two short sound signals and the coffee machine
will switch to the standby mode.
5. Descaling
To descale, use specialized coffee machine
cleaners in the form of liquids or tablets. It is rec-
ommended to prepare about 1.5 liters of cleaning
solution.
A. Pour the descaling agent into a container with
clean water and wait until it completely dissolves.
Descaling agents should be used in accor-
dance with the recommendations of the man-
ufacturer of cleaning products!
B. Open the lid (1) of the water tank (2) and pour
3/4 of the prepared volume of cleaning agent into
it, then add clean water to the tank to the maxi-
mum level.
Install a suitable container of at least 1.5 liters in
volume, on the metal grid of the tray (11) and adjust
the height of the coffee supply unit (9). Direct the
steam supply tube (8) into the installed container.
C. In the standby mode, press and hold the but-
ton «Menu» « » for 3 seconds to enter the
settings menu, and then press the button «Menu»
« » 4 more times and go to the descaling in-
terface, while the icon « » appears on the con-
trol panel display (Fig. 20). To start the process,
press the button «ОК» « » (Fig. 21).
D. During decalcination, the cleaning solu-
tion will start to exit alternately from the coffee
supply unit (9) and from the steam supply tube
(8) into the prepared container, while the icon
« » will flash. When the icon « » starts to
light constantly, pour the remaining third of the
cleaning solution into the water tank and fill it with
clean water to the maximum level. The descaling
process will continue automatically. At the end of
the process, two icons « » and « » will ap-
pear on the control panel (7). System flushing is
required.
E. Remove the water tank and drain the remaining
cleaning solution from it. Rinse the tank under run-
ning water, put it back in the coffee machine and
pour clean water to the maximum level. Press the
button «ОК» « », the system flushing will start.
F. When the coffee machine needs to add clean
water, the icon « » will flash on the display, fill
the tank with clean water to finish flushing.
After the system has been flushed, the coffee
machine will automatically switch to the standby
mode.
PERIODIC MAINTENANCE
OF THE COFFEE MACHINE
Removing/installing the main parts
of the coffee machine
The specifics of removal/installation of the main
parts of the coffee machine are shown on (Fig. 22).
Warning: when reinstalling the brewing unit (13)
in the correct position, you will hear a characteris-
tic click of the lock. If you can’t hear it, remove the
brewing unit again and reinstall it. (When installing
the brewing unit (13), align the ledges at the base
of the brewing unit with the corresponding slots in
the coffee machine, then slide it until a character-
istic click).
Warning: Check if the water tank is at the same
level as the upper plane of the coffee machine.
If not, push on the water tank until it fits into place
completely.

Содержание

Похожие устройства

Скачать