Ski-Doo Ski Doo SUMMIT 2005 [112/1429] Section 03 engines subsection 05 top end

Section 03 ENGINES

Subsection 05 (TOP END)

With blade stopper no. 13 removed, check reed

valve for proper tightness. There must be no play

between blade and valve body when exerting a

finger pressure on blade at blade stopper location.

In case of a play, turn blade upside down and

recheck. If there is still a play, replace blade and/or

valve body.

A06C0FA

1. No play

Check distance from blade stopper inner edge and

distance from center of reed valve block.

A06C36A

A A

TYPICAL

A. 14.75 - 0, + 0.75 mm (.580 - 0, + .030 in)

Bent blade stopper as required to obtain the prop-

er distance.

Blade stoppers may slightly interfere with cylinder

during installation. Adjusted distance will be re-

duced automatically upon installation.

92 mmr2005-072