![Kramer DIP-20 [18/81] But the cable is not removed there is a default delay ten seconds for video](/img/pdf.png)
Kramer DIP-20 [18/81] But the cable is not removed there is a default delay ten seconds for video
![Kramer DIP-20 [18/81] But the cable is not removed there is a default delay ten seconds for video](/views2/1152407/page18/bg12.png)
DIP-20 - Principles of Operation
13
6.2 Signal Loss and Unplugged Cable Timeouts
In both last connected and priority modes, when the input signal sync is lost
(but the cable is not removed) there is a default delay (ten seconds for video,
not applicable to the PC input, and five seconds for analog audio) before
another input is automatically selected. When an input cable is removed, there
is a delay before automatic switching takes place.
Both timeouts are configurable, (see Section 8.1).
Note: Analog audio is not output when there is no display connected. If a
display is connected analog audio is output even in the absence of a video
signal.
6.3 Audio Signal Control
The Option DIP-switches 3 and 4 (see Section 8.1) control the manner in which
audio is handled.
The following table describes which audio signal is embedded in the output.
Selected
Video Input
HDMI
Embedded
Audio Detected
Analog
Audio In
Detected
DIP-switch
3
DIP-switch
4
Audio on HDBT
Output
VGA
N/A
Yes
N/A
N/A
Analog Audio In
VGA
N/A
No
N/A
N/A
No audio
HDMI
N/A
N/A
Manual
Embedded
Embedded HDMI
audio
HDMI
N/A
N/A
Manual
Analog
Analog Audio In
HDMI
Yes
No
Auto
N/A
Embedded HDMI
audio
HDMI
Yes
Yes
Auto
Embedded
Embedded HDMI
audio
HDMI
Yes
Yes
Auto
Analog
Analog Audio In
HDMI
No
Yes
Auto
N/A
Analog Audio In
HDMI
No
No
Auto
N/A
No audio
When there is an audio signal but no video signal the output is a black video
pattern in conjunction with the external analog Audio In signal.
Содержание
- Automatic video switcher 1
- User manual 1
- Contents 4
- Figures 5
- Introduction 6
- Achieving the best performance 7
- Getting started 7
- Safety instructions 7
- Recycling kramer products 8
- Shielded twisted pair unshielded twisted pair 8
- Overview 9
- About hdbaset technology 10
- Defining the automatic video switcher 11
- Figure 1 defines the front panel of the dip 20 11
- Figure 2 defines the rear panel of the dip 20 12
- Connecting the dip 20 automatic video 13
- Connecting the dip 20 automatic video switcher 13
- Switcher 13
- Closure switches 15
- Connecting the remote control switches 15
- Figure 4 illustrates the connections from the terminal block to the contact 15
- Terminal block on the rear panel of the dip 20 to control the device 15
- You can connect remote momentary contact contact closure switches to the 15
- Connectors 16
- This section defines the tp pinout using a straight pin to pin cable with rj 45 16
- Wiring the rj 45 connectors 16
- Input selection 17
- Principles of operation 17
- Another input is automatically selected when an input cable is removed there 18
- Audio is handled 18
- Audio signal control 18
- Both timeouts are configurable see section 8 18
- But the cable is not removed there is a default delay ten seconds for video 18
- Display is connected analog audio is output even in the absence of a video 18
- In both last connected and priority modes when the input signal sync is lost 18
- Is a delay before automatic switching takes place 18
- Not applicable to the pc input and five seconds for analog audio before 18
- Note analog audio is not output when there is no display connected if a 18
- Pattern in conjunction with the external analog audio in signal 18
- Signal 18
- Signal loss and unplugged cable timeouts 18
- The following table describes which audio signal is embedded in the output 18
- The option dip switches 3 and 4 see section 8 control the manner in which 18
- When there is an audio signal but no video signal the output is a black video 18
- Vga phase shift 19
- Analog audio output volume control 20
- Locking the edid 20
- Operating the dip 20 20
- Resetting the dip 20 20
- Audio switching selection 22
- Configuring the dip 20 22
- Functions a switch that is down is on a switch that is up is off by default all 22
- Implement the change 22
- Note after changing a dip switch you must power cycle the device to 22
- Setting the configuration dip switch 22
- The 4 way dip switch provides the ability to configure a number of device 22
- The switches are up off 22
- Video switching selection 22
- Using the step in feature 23
- Video switching timeouts 23
- Browsing the dip 20 web pages 24
- Operating the dip 20 remotely using the 24
- Operating the dip 20 remotely using the web pages 24
- Web pages 24
- The areas of the main switching page are described in the following table 26
- The upload save configuration facility 27
- The switching page 28
- The switching page lets you select a video input manually and adjust the audio 28
- Volume 28
- The device settings page 29
- Browse to the required file 31
- Click ok 31
- Click ok to continue or cancel to exit the procedure 31
- Click start upgrade 31
- Click the browse button 31
- Click the factory reset button 31
- Do not interrupt the process or the dip 20 may be damaged 31
- On completion the success message is displayed 31
- Select the required file and click open 31
- The confirmation message is displayed 31
- The firmware file is loaded and a progress bar is displayed 31
- The firmware file name is displayed in the firmware upgrade page 31
- The firmware is upgraded 31
- The progress message is displayed 31
- The windows browser opens 31
- To reset the dip 20 to factory default parameters 31
- To upgrade the firmware 31
- When the process is complete reboot the device 31
- The video and audio settings page 32
- The video and audio settings page lets you modify the video audio and 32
- Timeout parameters 32
- The authentication page 33
- The authentication page lets you assign or change logon authentication details 33
- Changes on the device caused by outputs being exchanged click refresh to 34
- Default edid 34
- Edid data file 34
- Following sources 34
- From this page you can also lock the edid on each input independently 34
- Note the display is not updated automatically when the status of an edid 34
- Output 34
- The edid page 34
- The edid page lets you copy edid data to either or both of the inputs from the 34
- Update the display see item 11 in the following table 34
- All selected input buttons change color and the edid summary 35
- Check box 35
- Click a destination input or select both inputs by checking the inputs 35
- Click ok 35
- Click the copy button 35
- Click the source button from which to read the edid default output 35
- Electronics ltd company details 35
- Information reflects the selection and edid data 35
- Input or edid file 35
- Is copied to the selected input s 35
- Selection and edid data 35
- The about us page 35
- The button changes color and the edid summary information reflects the 35
- The dip 20 about us page displays the web page version and kramer 35
- The edid was copied success message is displayed and the edid data 35
- To copy edid data from a source to one or both inputs 35
- Technical specifications 37
- Default ip parameters 38
- Default logon credentials 38
- Supported resolutions 38
- Dip 20 technical specifications 39
- Resolution refresh rate 39
- Resolution refresh rate hz 39
- Default edid 40
- Each input on the dip 20 is loaded with a factory default edid 40
- Dip 20 default edid 41
- Dip 20 default edid 37 42
- Pc uxga 42
- Dip 20 default edid 43
- Command string 44
- Device message format 44
- Host message format 44
- Kramer protocol 3000 syntax 44
- Protocol 3000 44
- Simple command 44
- Command terms 45
- Device long response 45
- Chaining commands 46
- Command forms 46
- Entering commands 46
- Characters 47
- Maximum string length 47
- System commands 47
- File system commands 58
- 0 authentication commands 62
- 1 switching routing commands 65
- 2 video commands 66
- 3 audio commands 67
- 4 communication commands 70
- 5 edid handling commands 74
- 6 factory commands 78
- 7 layer 79
- 8 data source and destination ports 79
- 9 video audio signal changes 79
- Safety warning 81
Похожие устройства
- Kramer DIP-20 Инструкция по установке
- Kramer DIP-30 Инструкция по установке
- Kramer DIP-30 Руководства по эксплуатации
- Kramer VP-81SIDN Руководства по эксплуатации
- Razer Orochi 2013 (RZ01-00820100-R3G1) Инструкция по эксплуатации
- Razer Nabu X White (RZ15-01290200-R3G1) Инструкция по эксплуатации
- Razer Firefly (RZ02-01350100-R3M1) Инструкция по эксплуатации
- Razer Goliathus 2013 Speed Extended(RZ02-01070400-R3M1) Инструкция по эксплуатации
- Kramer SID-DP Руководства по эксплуатации
- Kramer SID-VGA Руководства по эксплуатации
- Kramer SID-H Руководства по эксплуатации
- Kramer SID-DVI Руководства по эксплуатации
- Kramer SID-X1N Руководства по эксплуатации
- Kramer SID-X2N Документация
- Kramer SID-X2N Руководства по эксплуатации
- Kramer SID-X3N Руководства по эксплуатации
- Kramer VS-41USB Руководства по эксплуатации
- Kramer VS-401USB Руководства по эксплуатации
- Kramer VS-801USB Руководства по эксплуатации
- Kramer VS-121HC Руководства по эксплуатации