Kramer Aspen RCP-7272 [35/48] Break away switching

ASPEN 7272 RCP CONTROL PANEL

Break-away Switching

When both video and audio layers are configured, it is possible to switch only video, only

audio, or both. To do that, toggle the V and A buttons so that only the desired level type

is lit.

Example (with auto take disabled):

1. Press the “OUT” button. The button will illuminate YELLOW.

2. Press output 2.

3. Press the “IN” button.

4. The input connected to will light. If audio and video are both connected to input 5, it will be cyan

5. Press input 6. It will blink cyan. The Take button will blink red.

6. To switch only audio to source 6, turn off the V button. Input 6 will now blink blue.

7. Press the Take button.

8. Input 6 will now be solid blue and input 5 will be solid green.

Note:

The V and A buttons can also be changed prior to choosing a preset.

Destination based Status

When an output is selected, the input currently connected to that output will light (when

the “IN” button is pressed). When video and audio(if available) are routed from the same

source then only that source button lamp will be lit.

Selected output button will be Yellow.

Input button colors:

CYAN to indicate video and audio.

GREEN to indicate video only.

BLUE to indicate audio only.

When a crosspoint switch is initiated from a point of control other than the local

pushbutton interface, AND it involves the currently selected destination, THEN the source

button tallies will be updated automatically.