Kramer Aspen RCP-7272 [41/48] Button brightness
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kramer Aspen RCP-7272 [41/48] Button brightness

ASPEN 7272 RCP CONTROL PANEL
31
For example, to set the IP address to 192.168.1.251
Press and hold the FUNC button until it turns BLUE.
Press Button 72. This button will turn blue.
Press Button 11. After the current octet value displays,
• Press Button 1
• Press Button 9
• Press Button 2. The Take button is now blinking.
• Press Take
Press Button 12. After the current octet value displays,
• Press Button 1
• Press Button 6
• Press Button 8. The Take button is now blinking.
• Press Take
Press Button 13. After the current octet value displays,
• Press Button 10
• Press Button 10 again
• Press Button 1. The Take button is now blinking.
• Press Take
Press Button 14. After the current octet value displays,
• Press Button 2
• Press Button 5
• Press Button 1. The Take button is now blinking.
• Press Take
Reset the IP address only to Factory Default
To reset IP address, subnet and gateway of the RCP without changing any other of the
settings or conditions:
Press and hold the FUNC button until it turns BLUE. While holding the FUNC
button;
Press and hold Button 61
The Button will be BLUE.
The TAKE button blinks RED.
While continuing to hold the FUNC button and the button 61, press the TAKE
button to execute. The RCP will be reset to Factory IP defaults.
Note: The IP Address can only be reset from the front panel if network settings are allowed to be
changed from the front panel. (See “Hardware Panel” Section.)
Button Brightness
To set the front panel button brightness;
Press and hold the FUNC button until it turns BLUE.
Press and release the Salvo button while holding the FUNC button.
Buttons 51-60 will be green.
One of the buttons 1 through 16 will be GREEN to indicate the current brightness
setting.
Press buttons 1 through 16 to select the brightness setting. Buttons 51-60 will
change to indicate the brightness setting.

Содержание

Похожие устройства

Скачать