Kramer Aspen RCP-7272 Руководства по эксплуатации онлайн [40/48] 140667

SIERRA VIDEO

For example, if the IP address is 192.168.1.250

 Press and hold the FUNC button until it turns BLUE

 Press Button 72. This button will turn blue.

 Press Button 11.

• Button 1 will turn on briefly

• Button 9 will turn on briefly

• Button 2 will turn on briefly

 Press Button 12.

• Button 1 will turn on briefly

• Button 6 will turn on briefly

• Button 8 will turn on briefly

 Press Button 13.

• Button 10 will turn on briefly

• Button 10 will turn on briefly again

• Button 1 will turn on briefly

 Press Button 14.

• Button 2 will turn on briefly

• Button 5 will turn on briefly

• Button 10 will turn on briefly again

To change the IP address;

This only works if the operator is allowed to change the IP Address at the front panel (see

“Hardware Panel” in the configuration section of this manual).

 Press and hold the FUNC button until it turns BLUE.

 Press Button 72. This button will turn blue.

• Buttons 11 through 14 will turn GREEN if the IP Address can be changed from

the front panel. Otherwise, these buttons will be BLUE.

 Press Button 11. This button will now blink.

• Three of the buttons 1 - 10 (for 0) will turn on briefly to display the 1st octet of the

IP address.

• Press 3 of the buttons 1-10 (for 0) to set the IP address for this octet of the IP

address. The Take button will now blink.

• Note that leading zeros are required.

• The button will be GREEN while it is held down.

• Press Take to change the IP Address.

 Press button 12. Repeat the procedure above for the 2nd octet of the IP address.

 Press button 13. Repeat the procedure above for the 3rd octet of the IP address.

 Press button 14. Repeat the procedure above for the 4th octet of the IP address.

 Release the FUNC button to exit.