Kramer Aspen RCP-7272 [36/48] Source based status

SIERRA VIDEO

Source based Switching

1. Select the “IN” button. The button will illuminate YELLOW.

2. Select an input. The selected input button will illuminate YELLOW.

3. Select the “OUT” button. The button will illuminate GREEN.

4. The buttons 1 through 72 will illuminate to show status of the input selected.

 CYAN indicates the source for video and audio

 GREEN indicates the source for video only

 BLUE indicates the source for audio only.

5. Select an output. (In auto take mode, the switch will occur immediately)

6. If auto take mode is not enabled the “Take” button will blink RED- press take to initiate

the switch, or you can select additional outputs to preset to the same selected source. In

the latter case, all selected outputs will be switched to the selected source when take is

pressed.

7. If an output is blinking, selecting it again will turn it off.

To do breakaways, see the section under Destination based switching.

Source based Status

When an input is selected, the output(s) currently connected to that input will light (when

the “OUT” button is pressed).

Selected input button will be YELLOW.

Output button colors:

CYAN to indicate video and audio.

GREEN to indicate video only.

BLUE to indicate audio only.