Ariete 4204 [15/74] Attachments
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ariete 4204 [15/74] Attachments

Ariete 4204 [15/74] Attachments
IT
- 13 -
EN
Switching on
Plug the appliance into a mains socket and press the on/off switch (I); the red light (G) will switch on (•
2
).
After a few minutes, the green light (H) will switch on to show that the steam is ready, meaning that the tank is pressurised •
and that the appliance is ready to dispense steam.
Operation
The steam ready light (H) will switch on and off during operation to show that the appliance has reached working pres-•
sure.
To prevent the steam from being dispensed accidentally, the lock cursor (B) must be moved from the left to the right •
( ); to release the steam function, move the cursor (B) from right to left ( ) (
3
).
To dispense steam, press the button (A) on the gun (C).•
When using for the first time, it is a good idea to spray the steam jet into a container to get rid of any water residues that •
might be inside the tube (any water coming out is because of the condensed steam inside the tube). This action needs
to be repeated even after a few minutes of appliance inactivity. In any case, when the gun begins to dispense steam,
always point the jet downwards to the ground.
IMPORTANT: When the appliance is not used, always block the steam button (A) using the relevant cursor (B).
Steam jet regulation
Use the dial (L), to regulate the amount of steam dispensed, from a minimum to a maximum, based on cleaning needs •
and on the type of surface or upholstery being cleaned.
Use a lower steam setting for delicate fabrics or surfaces.•
Switching off the appliance
Do not use the dial (L) to stop dispensing steam; release the dispenser button (A).•
After use, switch off the appliance, using the switch (I) and unplug it from the mains power socket. Clean the attachments •
and boiler tank as described in the “CLEANING AND MAINTENANCE” section.
Wind the hose around the body of the appliance (F) and fit the gun (C) over the handle (E), after placing the cursor (B) •
in the lock position.
ATTACHMENTS
Extension nozzle ①
With this attachment it is possible to thoroughly clean all those surfaces where stubborn dirt can take hold.
The nozzle can be fitted directly to the gun nozzle (D) or extension tubes ⑧: after lining up the marks on the gun nozzle
(D) and attachment, turn the nozzle 90° clockwise until it locks into place (
4
).
Hood ②
This attachment can be fitted to the gun nozzle (D) to protect the end.
Round brush ③
This attachment is for fitting on the extension nozzle ① and helps to dissolve the most stubborn dirt build up, such as the
type that forms on the cook top or in the grout widths between tiles. It can be used to clean bathroom fixtures, sinks, cooker
racks, showers and baths, where it removes all traces of scale (
5
).
Angled nozzle ④
This attachment can be fitted to the gun nozzle (D) after inserting the cap ② or extension nozzle ①.
It is particularly useful for reaching and sterilising difficult areas, where dirt can build up unseen, on radiators, shutters, and
bathroom fixtures, removing it simply and quickly (
6
).
Upholstery brush ⑤
The fabric brush can be fitted straight onto the gun nozzle (D) or to the extension tubes ⑧. When the handy cloth ⑬ is
fitted, it is possible to use the brush to remove dust and for daily cleaning of sofas, armchairs, blankets, mattresses and
cushions (
7
). The brush can also be used to freshen up fabrics, removing all creases. In any case, we recommend, when
using for the first time and during normal use, to discharge the condensation from the steam into a container so as not to
wet the fabrics (
8
).

Содержание

Похожие устройства

Скачать