Moxa PT-7528-20MSC-4TX-4GSFP-HV-HV [26/116] Network parameters

PT-7528 Series Advanced Settings

4-6

FDX Flow Ctrl

This setting enables or disables flow control for the port when the port’s Speed is set to Auto. The final result

will be determined by the Auto process between the Moxa switch and connected devices.

Setting Description Factory Default

Enable

Enables flow control for this port when the port’s Speed

is set to Auto.

Disabled

Disable

Disables flow control for this port when the port’s Speed

is set to Auto.

MDI/MDIX

Setting Description Factory Default

Auto

Allows the port to auto-detect the port type of the connected

Ethernet device and change the port type accordingly.

Auto

MDI

Choose MDI or MDIX if the connected Ethernet device has

trouble auto-negotiating for port type.

MDIX

Network Parameters

Network configuration allows users to configure both IPv4 and IPv6 parameters for management access over

the network. The Moxa switch supports both IPv4 and IPv6, and can be managed through either of these

address types.

A brief explanation of each configuration item is given below.

IP4

The IPv4 settings include the switch’s IP address and subnet mask, as well as the IP address of the default

gateway. In addition, input cells are provided for the IP addresses of a 1st and 2nd DNS server.

Auto IP Configuration

Setting Description Factory Default

Disable The Moxa switch’s IP address must be set manually. Disable

By DHCP The Moxa switch’s IP address will be assigned automatically by

the network’s DHCP server.

By BootP The Moxa switch’s IP address will be assigned automatically by

the network’s BootP server.

Switch IP Address

Setting Description Factory Default

IP address for the Moxa

switch

Assigns the Moxa switch’s IP address on a TCP/IP network. 192.168.127.253